AD7608BSTZ-RL

Mfr. #:
AD7608BSTZ-RL
Mfr.:
Analog Devices
Product Type:
ADC
Package / Case:
64-LQFP
Description:
Eight-channel, 18-bit simultaneous-sampling data acquisition system with bipolar inputs and integrated signal conditioning.

Product Attributes

AttributeValue
ArchitectureSAR
Resolution18 bits
Input TypeSingle-ended, true bipolar
Input Range±10 V or ±5 V, pin selectable
InterfaceParallel or serial, SPI/QSPI/MICROWIRE compatible
Supply VoltageAVCC 4.75–5.25 V
Operating Temperature−40°C to +85°C
Number Of Channels8, simultaneous sampling
Sampling Rate200 kSPS max per channel without oversampling
Input Impedance1 MΩ
Analog FilterSecond-order antialiasing filter
Oversampling Ratio2, 4, 8, 16, 32 or 64
Reference TypeInternal 2.5 V reference or external reference
Digital Supply VoltageVDRIVE 2.3–5.25 V
Package Details64-lead LQFP, 10 × 10 mm body (ST-64-2)

Product Details

AD7608BSTZ-RL acquires eight bipolar voltage inputs simultaneously with 18-bit conversion. Its input buffers and selectable ±10 V or ±5 V ranges accept these signals while the converter runs from a single 5 V analog supply, simplifying the interface to industrial voltage measurements.

The integrated analog filter and 1 MΩ input impedance reduce the external signal-conditioning burden. Sampling can reach 200 kSPS on every channel, while optional oversampling improves noise performance at the cost of bandwidth and throughput. At 64× oversampling, the maximum throughput falls to 3.125 kSPS, so filter selection must follow the required measurement speed.

Serial readout can use one or two data lines. Reading all eight results on one line requires 144 clock cycles, compared with 72 cycles using both outputs. The host clock and read timing must therefore support the selected channel throughput.

Quality · Shipping · Payment

Details

Quality Confirmation

Pre-shipment checks cover batch, package, labels and markings. Inspection photos and third-party inspection support are available on request.

Shipping

Worldwide delivery is supported. Carrier, lead time and buyer-appointed forwarder requirements are confirmed with the quotation.

Payment

Payment method, currency and trade terms are subject to the formal quotation or proforma invoice.