ADS1232IPWR

Mfr. #:
ADS1232IPWR
Mfr.:
Texas Instruments
Product Type:
ADC
Package / Case:
24-TSSOP
Description:
24-bit, two-channel differential delta-sigma ADC with a pin-programmable PGA for bridge sensors.

Product Attributes

AttributeValue
ArchitectureDelta-Sigma
Resolution24 bits
Input Channels2 multiplexed differential inputs
InterfaceTwo-wire serial output; dedicated configuration pins
Supply VoltageAVDD and DVDD: 2.7 to 5.3 V
Operating Temperature−40°C to +105°C
Output Data Rate10 or 80 SPS nominal at fCLK = 4.9152 MHz
PGA Gain1, 2, 64, or 128
Reference InputExternal differential reference: 1.5 V to AVDD + 0.1 V
Full-Scale Input Range±VREF / (2 × gain) differential
Input Common-Mode RangeAGND + 1.5 V to AVDD − 1.5 V at gain 64 or 128
Input-Referred RMS Noise17 nV typical at 10 SPS, gain 128, AVDD = VREF = 5 V
Clock SourceInternal oscillator, external crystal, or external clock
Standard Packing2,000 pieces, large tape and reel
Package Details24-lead TSSOP (PW0024A), 7.8 × 4.4 mm nominal body, 0.65 mm pitch

Product Details

ADS1232IPWR digitizes the small differential signals produced by bridge sensors. Its PGA matches the bridge output to the conversion range, with gain and the external reference jointly setting the full-scale input to ±VREF/(2 × gain).

High gain also introduces an input-bias constraint. At gains of 64 and 128, the analog input pins must stay between AGND + 1.5 V and AVDD − 1.5 V, so bridge excitation and bias must be considered together with signal amplitude.

The output-rate choice balances mains-noise rejection against update speed. The nominal 10 SPS setting rejects both 50 Hz and 60 Hz interference, while 80 SPS supplies more frequent readings. These nominal rates assume a 4.9152 MHz clock, and an external clock changes the rate and filter response together.

Quality · Shipping · Payment

Details

Quality Confirmation

Pre-shipment checks cover batch, package, labels and markings. Inspection photos and third-party inspection support are available on request.

Shipping

Worldwide delivery is supported. Carrier, lead time and buyer-appointed forwarder requirements are confirmed with the quotation.

Payment

Payment method, currency and trade terms are subject to the formal quotation or proforma invoice.