AD7705BRUZ-REEL7

Mfr. #:
AD7705BRUZ-REEL7
Mfr.:
Analog Devices
Product Type:
ADC
Package / Case:
16-TSSOP
Description:
16-bit sigma-delta ADC with two differential input channels, a programmable-gain front end, and a three-wire serial interface.

Product Attributes

AttributeValue
ArchitectureSigma-Delta
Resolution16 bits; no missing codes guaranteed for filter notch below 60 Hz
Input Channels2 multiplexed, fully differential inputs
InterfaceThree-wire serial; SPI, QSPI, MICROWIRE, and DSP compatible
Supply Voltage2.7 to 3.3 V or 4.75 to 5.25 V
Operating Temperature−40°C to +85°C
Output Data Rate20 to 500 SPS selectable, dependent on master clock and filter setting
PGA Gain1, 2, 4, 8, 16, 32, 64, or 128
Reference InputExternal differential; specified with 1.225 V at 3 V supply or 2.5 V at 5 V supply
Full-Scale Input Range0 to VREF / gain (unipolar) or ±VREF / gain (bipolar)
Buffered Input RangeGND + 50 mV to VDD − 1.5 V
Integral Nonlinearity±0.003% of FSR maximum, filter notch below 60 Hz
CalibrationSelf-calibration and system zero-scale/full-scale calibration
Package Details16-lead TSSOP (RU-16), 5.0 × 4.4 mm nominal body, 0.65 mm pitch

Product Details

AD7705BRUZ-REEL7 converts low-frequency differential transducer signals, using its PGA and external reference to match the measurement span. Their settings establish a unipolar range from zero to VREF/gain or a bipolar range of ±VREF/gain, allowing small sensor outputs to use more of the conversion range.

The input buffer accommodates higher source impedance, with a headroom cost. When enabled, it restricts the analog input voltage to GND + 50 mV through VDD − 1.5 V, so a sensor's common-mode level can determine whether buffered operation is suitable.

Clock and digital-filter settings trade output rate against measurement performance. Although selectable rates extend to 500 SPS, the 16-bit no-missing-codes guarantee applies with the filter notch below 60 Hz. Selecting a faster update therefore requires evaluating the noise and resolution at that filter setting.

Quality · Shipping · Payment

Details

Quality Confirmation

Pre-shipment checks cover batch, package, labels and markings. Inspection photos and third-party inspection support are available on request.

Shipping

Worldwide delivery is supported. Carrier, lead time and buyer-appointed forwarder requirements are confirmed with the quotation.

Payment

Payment method, currency and trade terms are subject to the formal quotation or proforma invoice.