AD7608BSTZ-RL

制造商型号:
AD7608BSTZ-RL
制造商:
Analog Devices
产品类型:
ADC
封装:
64-LQFP
描述:
Eight-channel, 18-bit simultaneous-sampling data acquisition system with bipolar inputs and integrated signal conditioning.

产品属性

属性数值
ArchitectureSAR
Resolution18 bits
Input TypeSingle-ended, true bipolar
Input Range±10 V or ±5 V, pin selectable
InterfaceParallel or serial, SPI/QSPI/MICROWIRE compatible
Supply VoltageAVCC 4.75–5.25 V
Operating Temperature−40°C to +85°C
Number Of Channels8, simultaneous sampling
Sampling Rate200 kSPS max per channel without oversampling
Input Impedance1 MΩ
Analog FilterSecond-order antialiasing filter
Oversampling Ratio2, 4, 8, 16, 32 or 64
Reference TypeInternal 2.5 V reference or external reference
Digital Supply VoltageVDRIVE 2.3–5.25 V
Package Details64-lead LQFP, 10 × 10 mm body (ST-64-2)

产品详细说明

AD7608BSTZ-RL acquires eight bipolar voltage inputs simultaneously with 18-bit conversion. Its input buffers and selectable ±10 V or ±5 V ranges accept these signals while the converter runs from a single 5 V analog supply, simplifying the interface to industrial voltage measurements.

The integrated analog filter and 1 MΩ input impedance reduce the external signal-conditioning burden. Sampling can reach 200 kSPS on every channel, while optional oversampling improves noise performance at the cost of bandwidth and throughput. At 64× oversampling, the maximum throughput falls to 3.125 kSPS, so filter selection must follow the required measurement speed.

Serial readout can use one or two data lines. Reading all eight results on one line requires 144 clock cycles, compared with 72 cycles using both outputs. The host clock and read timing must therefore support the selected channel throughput.

质量 · 运输 · 付款

详情

质量确认

发货前核对批次、封装、标签及丝印。可按需提供验货照片,并协助第三方检验。

运输

支持全球交付。承运商、交期及买方指定货代要求,在报价时确认。

付款

付款方式、币种及贸易条款,以正式报价或形式发票为准。