BMI260

Mfr. #:
BMI260
Mfr.:
Bosch Sensortec
Product Type:
IMU (Inertial Measurement Unit)
Series:
BMI260
Package / Case:
14-LGA
Description:
6-axis IMU with 16-bit accelerometer and gyroscope, SPI/I²C, 14-LGA

Product Attributes

AttributeValue
Sensor Axes3-axis accelerometer and 3-axis gyroscope
Digital Resolution16-bit accelerometer; 16-bit gyroscope
Acceleration Range±2 to ±16 g, programmable
Angular Rate Range±125 to ±2000 dps, programmable
Output Data RateAccelerometer 12.5 Hz to 1.6 kHz; gyroscope 25 Hz to 6.4 kHz
Filter BandwidthAccelerometer 5 to 684 Hz; gyroscope 11 to 751 Hz, programmable
Digital InterfacePrimary SPI or I²C; configurable secondary SPI or I²C for AUX/OIS
Interrupt Outputs2 programmable digital interrupt pins
Supply VoltageVDD 1.7 to 3.6 V; VDDIO 1.2 to 3.6 V
Current Consumption685 µA typ at full ODR, aliasing-free operation
Noise DensityAccelerometer 160 µg/√Hz; gyroscope 0.008 dps/√Hz typ
Gyroscope Sensitivity Error±0.4% typ with CRT
Operating Temperature-40 to +85 °C
On-Chip Motion FeaturesMotion-triggered interrupts; step detector and counter
Package Details14-pin LGA, 2.5 x 3.0 x 0.8 mm

Product Details

BMI260 is a six-axis inertial measurement unit combining a three-axis 16-bit accelerometer and a three-axis 16-bit gyroscope for sensing device movement and rotation. Its programmable ±2 to ±16 g acceleration range and ±125 to ±2000 dps angular-rate range let the host choose sensitivity appropriate to the expected motion, with measurements transferred over a primary SPI or I²C interface.

For image stabilization and motion tracking, the gyroscope can produce data at up to 6.4 kHz and the accelerometer at up to 1.6 kHz. A configurable secondary interface supports an auxiliary sensor or OIS path, while dual SPI operation can serve two camera modules. The selected output rate, filter bandwidth and interface configuration therefore determine the timing and motion bandwidth available to the host.

Motion-triggered interrupts and an on-chip step detector and counter can wake the host only for selected events. Bosch lists 685 µA typical current for both sensors at full output rate in aliasing-free operation, so that figure should not be applied to every sensor mode. Separate 1.7 to 3.6 V VDD and 1.2 to 3.6 V VDDIO ranges allow the sensor supply and host logic supply to be checked independently.

Quality · Shipping · Payment

Details

Quality Confirmation

Pre-shipment checks cover batch, package, labels and markings. Inspection photos and third-party inspection support are available on request.

Shipping

Worldwide delivery is supported. Carrier, lead time and buyer-appointed forwarder requirements are confirmed with the quotation.

Payment

Payment method, currency and trade terms are subject to the formal quotation or proforma invoice.