BMI260

制造商型号:
BMI260
制造商:
Bosch Sensortec
产品类型:
IMU (Inertial Measurement Unit)
系列:
BMI260
封装:
14-LGA
描述:
6-axis IMU with 16-bit accelerometer and gyroscope, SPI/I²C, 14-LGA

产品属性

属性数值
Sensor Axes3-axis accelerometer and 3-axis gyroscope
Digital Resolution16-bit accelerometer; 16-bit gyroscope
Acceleration Range±2 to ±16 g, programmable
Angular Rate Range±125 to ±2000 dps, programmable
Output Data RateAccelerometer 12.5 Hz to 1.6 kHz; gyroscope 25 Hz to 6.4 kHz
Filter BandwidthAccelerometer 5 to 684 Hz; gyroscope 11 to 751 Hz, programmable
Digital InterfacePrimary SPI or I²C; configurable secondary SPI or I²C for AUX/OIS
Interrupt Outputs2 programmable digital interrupt pins
Supply VoltageVDD 1.7 to 3.6 V; VDDIO 1.2 to 3.6 V
Current Consumption685 µA typ at full ODR, aliasing-free operation
Noise DensityAccelerometer 160 µg/√Hz; gyroscope 0.008 dps/√Hz typ
Gyroscope Sensitivity Error±0.4% typ with CRT
Operating Temperature-40 to +85 °C
On-Chip Motion FeaturesMotion-triggered interrupts; step detector and counter
Package Details14-pin LGA, 2.5 x 3.0 x 0.8 mm

产品详细说明

BMI260 is a six-axis inertial measurement unit combining a three-axis 16-bit accelerometer and a three-axis 16-bit gyroscope for sensing device movement and rotation. Its programmable ±2 to ±16 g acceleration range and ±125 to ±2000 dps angular-rate range let the host choose sensitivity appropriate to the expected motion, with measurements transferred over a primary SPI or I²C interface.

For image stabilization and motion tracking, the gyroscope can produce data at up to 6.4 kHz and the accelerometer at up to 1.6 kHz. A configurable secondary interface supports an auxiliary sensor or OIS path, while dual SPI operation can serve two camera modules. The selected output rate, filter bandwidth and interface configuration therefore determine the timing and motion bandwidth available to the host.

Motion-triggered interrupts and an on-chip step detector and counter can wake the host only for selected events. Bosch lists 685 µA typical current for both sensors at full output rate in aliasing-free operation, so that figure should not be applied to every sensor mode. Separate 1.7 to 3.6 V VDD and 1.2 to 3.6 V VDDIO ranges allow the sensor supply and host logic supply to be checked independently.

质量 · 运输 · 付款

详情

质量确认

发货前核对批次、封装、标签及丝印。可按需提供验货照片,并协助第三方检验。

运输

支持全球交付。承运商、交期及买方指定货代要求,在报价时确认。

付款

付款方式、币种及贸易条款,以正式报价或形式发票为准。