AD7705BRUZ-REEL7

制造商型号:
AD7705BRUZ-REEL7
制造商:
Analog Devices
产品类型:
ADC
封装:
16-TSSOP
描述:
16-bit sigma-delta ADC with two differential input channels, a programmable-gain front end, and a three-wire serial interface.

产品属性

属性数值
ArchitectureSigma-Delta
Resolution16 bits; no missing codes guaranteed for filter notch below 60 Hz
Input Channels2 multiplexed, fully differential inputs
InterfaceThree-wire serial; SPI, QSPI, MICROWIRE, and DSP compatible
Supply Voltage2.7 to 3.3 V or 4.75 to 5.25 V
Operating Temperature−40°C to +85°C
Output Data Rate20 to 500 SPS selectable, dependent on master clock and filter setting
PGA Gain1, 2, 4, 8, 16, 32, 64, or 128
Reference InputExternal differential; specified with 1.225 V at 3 V supply or 2.5 V at 5 V supply
Full-Scale Input Range0 to VREF / gain (unipolar) or ±VREF / gain (bipolar)
Buffered Input RangeGND + 50 mV to VDD − 1.5 V
Integral Nonlinearity±0.003% of FSR maximum, filter notch below 60 Hz
CalibrationSelf-calibration and system zero-scale/full-scale calibration
Package Details16-lead TSSOP (RU-16), 5.0 × 4.4 mm nominal body, 0.65 mm pitch

产品详细说明

AD7705BRUZ-REEL7 converts low-frequency differential transducer signals, using its PGA and external reference to match the measurement span. Their settings establish a unipolar range from zero to VREF/gain or a bipolar range of ±VREF/gain, allowing small sensor outputs to use more of the conversion range.

The input buffer accommodates higher source impedance, with a headroom cost. When enabled, it restricts the analog input voltage to GND + 50 mV through VDD − 1.5 V, so a sensor's common-mode level can determine whether buffered operation is suitable.

Clock and digital-filter settings trade output rate against measurement performance. Although selectable rates extend to 500 SPS, the 16-bit no-missing-codes guarantee applies with the filter notch below 60 Hz. Selecting a faster update therefore requires evaluating the noise and resolution at that filter setting.

质量 · 运输 · 付款

详情

质量确认

发货前核对批次、封装、标签及丝印。可按需提供验货照片,并协助第三方检验。

运输

支持全球交付。承运商、交期及买方指定货代要求,在报价时确认。

付款

付款方式、币种及贸易条款,以正式报价或形式发票为准。