TPS23753APWR

Mfr. #:
TPS23753APWR
Mfr.:
Texas Instruments
Product Type:
PoE PD Interface and DC/DC Controller
Series:
TPS23753A
Package / Case:
14-TSSOP
Description:
IEEE 802.3at Type 1 PoE PD interface and isolated-converter controller, 13 W, 14-TSSOP

Product Attributes

AttributeValue
PoE StandardIEEE 802.3at Type 1, hardware classes 0–3
PD Input Power13 W Type 1 powered device
Integrated Hotswap MOSFET100 V, 0.7 Ω
PD Input VoltageUp to 57 V recommended operating voltage
DC/DC ControlCurrent-mode controller for isolated converters; 0–78% duty cycle
PoE UVLO35 V turn-on, 4.5 V hysteresis
DC/DC UVLO9 V turn-on, 3.5 V hysteresis
Adapter Support12 V adapter input with selectable PoE, adapter or highest-voltage priority
Operating Temperature−40 °C to +125 °C junction
Package Details14-pin TSSOP (PW), 5.0 × 4.4 mm body, 1.2 mm maximum height

Product Details

TPS23753APWR combines the powered-device front end for an IEEE 802.3at Type 1 connection with a current-mode controller for an isolated DC/DC converter. Detection and resistor-programmed classification identify the PD before the integrated hot-swap MOSFET connects the input bulk capacitor; the Type 1 allocation is 13 W, so the downstream converter and load must stay within that delivered-power class.

The internal 100 V, 0.7 Ω hot-swap path manages inrush and disconnects the converter on PoE faults, but the switching MOSFET, transformer, secondary rectifier and feedback components remain external. Bootstrap startup powers the control section without a continuously dissipating pullup resistor, while the 9 V converter UVLO and programmed switching conditions must match the transformer and bias-winding design.

Adapter-detect inputs support PoE priority, adapter priority or highest-voltage selection for a 12 V auxiliary source. Those ORing choices decide which input supplies the isolated stage and must be coordinated with the classification and startup network; they do not increase the negotiated PoE power available from the Ethernet source.

Quality · Shipping · Payment

Details

Quality Confirmation

Pre-shipment checks cover batch, package, labels and markings. Inspection photos and third-party inspection support are available on request.

Shipping

Worldwide delivery is supported. Carrier, lead time and buyer-appointed forwarder requirements are confirmed with the quotation.

Payment

Payment method, currency and trade terms are subject to the formal quotation or proforma invoice.