LTM4702IY

Mfr. #:
LTM4702IY
Mfr.:
Analog Devices
Product Type:
DC-DC Power Module
Series:
Silent Switcher® 3 µModule®
Package / Case:
49-BGA
Description:
8 A Silent Switcher® 3 µModule® buck regulator, 3–16 V input, 0.3–5.7 V output, 49-BGA

Product Attributes

AttributeValue
TopologySynchronous step-down µModule® regulator
Input Voltage3–16 V, with SVIN bias and output-headroom conditions
Output Voltage0.3–5.7 V, resistor programmed
Output Current8 A maximum continuous, subject to operating point and thermal derating
Switching Frequency300 kHz–3 MHz, adjustable and synchronizable
Output Noise8 µV RMS typical, 10 Hz–100 kHz, VIN = SVIN = 12 V, VOUT = 1 V, IOUT = 0.5 A, COUT = 200 µF, CSET = 4.7 µF, RSET = 10 kΩ, fSW = 2 MHz, TA = 25 °C
Control MethodCurrent-mode control, forced-continuous capability
IntegrationSwitching controller, MOSFETs, inductor and support components
Bias RequirementSVIN above 4 V for ±1.5% maximum total DC error, SVIN at least 0.4 V above VOUT
Parallel OperationMultiphase with current sharing
Power GoodProgrammable threshold
Ball FinishSnPb (63/37) for exact LTM4702IY ordering code
Junction Temperature−40 °C to +125 °C, I grade
Package Details6.25 × 6.25 × 5.07 mm

Product Details

LTM4702IY integrates a switching controller, power MOSFETs and an inductor into an 8 A step-down µModule® regulator. Its Silent Switcher® 3 architecture combines low switching emissions with a low-noise reference path, supporting sensitive RF and data-converter supplies. The board completes the power stage with input and output capacitors and sets the output with a resistor.

The SET bypass capacitor reduces reference-path noise and also influences start-up time. Its capacitance and leakage therefore affect both the voltage ramp and DC regulation. SVIN bias requires headroom above the requested output, and the stated total DC accuracy uses SVIN above 4 V. Output-current capability must also follow the thermal derating curves for the selected voltage ratio and switching frequency.

The IY ordering code specifies SnPb ball finish and the industrial internal operating-temperature grade. That finish is part of the assembly choice when matching an existing board and its soldering process.

Quality · Shipping · Payment

Details

Quality Confirmation

Pre-shipment checks cover batch, package, labels and markings. Inspection photos and third-party inspection support are available on request.

Shipping

Worldwide delivery is supported. Carrier, lead time and buyer-appointed forwarder requirements are confirmed with the quotation.

Payment

Payment method, currency and trade terms are subject to the formal quotation or proforma invoice.