DRV8912QPWPRQ1

Mfr. #:
DRV8912QPWPRQ1
Mfr.:
Texas Instruments
Product Type:
Multi-Channel Half-Bridge Driver
Series:
DRV89xx-Q1
Package / Case:
HTSSOP-24
Description:
Multi-Channel Half-Bridge Driver

Product Attributes

AttributeValue
Supply VoltageVM 4.5 to 32 V; VDD logic supply 3.0 to 5.5 V
Output Current1 A RMS per output, subject to thermal design; 6 A maximum for paralleled outputs is a family limit, not per-channel current
Control Interface5-MHz, 16-bit SPI; daisy-chain support
ProtectionOvercurrent, undervoltage/overvoltage, enhanced open-load detection, thermal warning/shutdown and nFAULT
Operating Temperature-40 to +125 °C ambient; -40 to +150 °C junction
Outputs12 independently controlled half-bridges with integrated power MOSFETs
On Resistance0.75 ohm typical per high-side or low-side FET at VM = 13.5 V, IOUT = 0.5 A, TA = 25 °C
PWM8-bit duty-cycle resolution; 80/100/200/2000 Hz typical selectable PWM rates
Package DetailsHTSSOP PowerPAD, PWP, 24 pins; 7.8 x 4.4 mm body; 0.65 mm pitch; 1.2 mm maximum height

Product Description

DRV8912QPWPRQ1 integrates twelve half-bridges for a 4.5 to 32 V motor supply and uses a separate 3.0 to 5.5 V logic supply. The outputs provide a shared driver for multiple small actuators or LED loads. The host can command direction, brake and coast states over a daisy-chain-capable SPI interface.

Channel count does not multiply the package current capability: each output and the combined supply current must stay within their respective limits. Open-load diagnostics support detection even with small nominal load currents.

Quality · Shipping · Payment

Quality Confirmation

Pre-shipment checks cover batch, package, labels and markings. Inspection photos and third-party inspection support are available on request.

Shipping

Worldwide delivery is supported. Carrier, lead time and buyer-appointed forwarder requirements are confirmed with the quotation.

Payment

Payment method, currency and trade terms are subject to the formal quotation or proforma invoice.