全部型号

DRV8912QPWPRQ1

制造商型号：
DRV8912QPWPRQ1
制造商：
Texas Instruments
产品类型：
Multi-Channel Half-Bridge Driver
系列：
DRV89xx-Q1
封装：
HTSSOP-24
描述：
Multi-Channel Half-Bridge Driver

产品属性

属性数值
Supply VoltageVM 4.5 to 32 V; VDD logic supply 3.0 to 5.5 V
Output Current1 A RMS per output, subject to thermal design; 6 A maximum for paralleled outputs is a family limit, not per-channel current
Control Interface5-MHz, 16-bit SPI; daisy-chain support
ProtectionOvercurrent, undervoltage/overvoltage, enhanced open-load detection, thermal warning/shutdown and nFAULT
Operating Temperature-40 to +125 °C ambient; -40 to +150 °C junction
Outputs12 independently controlled half-bridges with integrated power MOSFETs
On Resistance0.75 ohm typical per high-side or low-side FET at VM = 13.5 V, IOUT = 0.5 A, TA = 25 °C
PWM8-bit duty-cycle resolution; 80/100/200/2000 Hz typical selectable PWM rates
Package DetailsHTSSOP PowerPAD, PWP, 24 pins; 7.8 x 4.4 mm body; 0.65 mm pitch; 1.2 mm maximum height

产品描述

DRV8912QPWPRQ1 integrates twelve half-bridges for a 4.5 to 32 V motor supply and uses a separate 3.0 to 5.5 V logic supply. The outputs provide a shared driver for multiple small actuators or LED loads. The host can command direction, brake and coast states over a daisy-chain-capable SPI interface.

Channel count does not multiply the package current capability: each output and the combined supply current must stay within their respective limits. Open-load diagnostics support detection even with small nominal load currents.

质量 · 运输 · 付款

质量确认

发货前核对批次、封装、标签及丝印。可按需提供验货照片，并协助第三方检验。

运输

支持全球交付。承运商、交期及买方指定货代要求，在报价时确认。

付款

付款方式、币种及贸易条款，以正式报价或形式发票为准。

查看全部