LSM6DSVTR

Mfr. #:
LSM6DSVTR
Mfr.:
STMicroelectronics
Product Type:
IMU
Series:
LSM6DSV
Package / Case:
14-LGA
Description:
6-axis IMU with sensor fusion, I²C, SPI and MIPI I3C, 14-LGA

Product Attributes

AttributeValue
Measurement Type3-axis acceleration + 3-axis angular rate
Full-Scale Range (Accel)±2 g / ±4 g / ±8 g / ±16 g
Full-Scale Range (Gyro)±125 / ±250 / ±500 / ±1000 / ±2000 / ±4000 dps
InterfaceI²C / SPI / MIPI I3C v1.1; auxiliary SPI for OIS
FIFO1.5 KB physical FIFO; up to 4.5 KB effective with compression
Embedded ProcessingLow-power sensor fusion, programmable finite-state machine and adaptive self-configuration
Noise (Gyro)2.8 mdps/√Hz typical in high-performance mode
Noise (Accel)60 µg/√Hz typical in high-performance mode
Supply Voltage1.71 V to 3.6 V analog; 1.08 V to 3.6 V I/O
Current Consumption0.65 mA typical, accelerometer + gyroscope high-performance mode
Operating Temperature−40 °C to +85 °C
Package Details14-lead LGA, 2.5 × 3.0 × 0.83 mm typical, 0.86 mm maximum height

Product Details

LSM6DSVTR measures three-axis acceleration and three-axis angular rate through separate user-interface, optical-stabilization and electronic-stabilization processing paths. The main host and camera subsystem can therefore use data streams with filtering and timing configured for their different motion-processing roles.

Its selectable ranges extend to ±16 g and ±4000 dps. The ±4000 dps gyroscope setting disables the OIS chain, so firmware must choose between that highest UI range and simultaneous OIS operation. The published 2.8 mdps/√Hz gyroscope and 60 µg/√Hz accelerometer noise figures apply to high-performance mode.

A 1.5 KB FIFO can batch sensor, timestamp and fusion output, with compression increasing the effective stored data to 4.5 KB. Watermark and batch-rate settings determine how often the host wakes to empty it. With both sensors enabled in the data sheet's high-performance mode, current is 0.65 mA typical.

Quality · Shipping · Payment

Details

Quality Confirmation

Pre-shipment checks cover batch, package, labels and markings. Inspection photos and third-party inspection support are available on request.

Shipping

Worldwide delivery is supported. Carrier, lead time and buyer-appointed forwarder requirements are confirmed with the quotation.

Payment

Payment method, currency and trade terms are subject to the formal quotation or proforma invoice.