LSM6DSVTR

制造商型号:
LSM6DSVTR
制造商:
STMicroelectronics
产品类型:
IMU
系列:
LSM6DSV
封装:
14-LGA
描述:
6-axis IMU with sensor fusion, I²C, SPI and MIPI I3C, 14-LGA

产品属性

属性数值
Measurement Type3-axis acceleration + 3-axis angular rate
Full-Scale Range (Accel)±2 g / ±4 g / ±8 g / ±16 g
Full-Scale Range (Gyro)±125 / ±250 / ±500 / ±1000 / ±2000 / ±4000 dps
InterfaceI²C / SPI / MIPI I3C v1.1; auxiliary SPI for OIS
FIFO1.5 KB physical FIFO; up to 4.5 KB effective with compression
Embedded ProcessingLow-power sensor fusion, programmable finite-state machine and adaptive self-configuration
Noise (Gyro)2.8 mdps/√Hz typical in high-performance mode
Noise (Accel)60 µg/√Hz typical in high-performance mode
Supply Voltage1.71 V to 3.6 V analog; 1.08 V to 3.6 V I/O
Current Consumption0.65 mA typical, accelerometer + gyroscope high-performance mode
Operating Temperature−40 °C to +85 °C
Package Details14-lead LGA, 2.5 × 3.0 × 0.83 mm typical, 0.86 mm maximum height

产品详细说明

LSM6DSVTR measures three-axis acceleration and three-axis angular rate through separate user-interface, optical-stabilization and electronic-stabilization processing paths. The main host and camera subsystem can therefore use data streams with filtering and timing configured for their different motion-processing roles.

Its selectable ranges extend to ±16 g and ±4000 dps. The ±4000 dps gyroscope setting disables the OIS chain, so firmware must choose between that highest UI range and simultaneous OIS operation. The published 2.8 mdps/√Hz gyroscope and 60 µg/√Hz accelerometer noise figures apply to high-performance mode.

A 1.5 KB FIFO can batch sensor, timestamp and fusion output, with compression increasing the effective stored data to 4.5 KB. Watermark and batch-rate settings determine how often the host wakes to empty it. With both sensors enabled in the data sheet's high-performance mode, current is 0.65 mA typical.

质量 · 运输 · 付款

详情

质量确认

发货前核对批次、封装、标签及丝印。可按需提供验货照片,并协助第三方检验。

运输

支持全球交付。承运商、交期及买方指定货代要求,在报价时确认。

付款

付款方式、币种及贸易条款,以正式报价或形式发票为准。