MT25QU256ABA8ESF-0SIT

Mfr. #:
MT25QU256ABA8ESF-0SIT
Mfr.:
Micron Technology
Product Type:
NOR Flash
Series:
MT25QU
Package / Case:
16-SOIC
Description:
256 Mbit SPI NOR flash, 1.7–2.0 V, 166 MHz STR, 16-SOIC

Product Attributes

AttributeValue
Density256 Mbit (32 MiB)
InterfaceSPI-compatible extended, Dual and Quad I/O, STR and DTR
Supply Voltage1.7–2.0 V
Operating TemperatureIT −40 °C to +85 °C
Read Clock166 MHz maximum STR; 90 MHz maximum DTR, command and dummy-cycle conditions apply
Read TimingTDP host-sampling adjustment supported above 133 MHz STR or 66 MHz DTR
Program Page Size256 bytes
Erase Geometry4 KiB and 32 KiB subsectors, 64 KiB sectors, bulk erase
Addressing3-byte address window with extended addressing or supported 4-byte mode/instructions
Reset / Hold PinsPin option 8 provides dedicated RESET# and HOLD#
Execute In PlaceXIP supported through configured read mode
SuspendProgram/erase suspend and resume
OTP64-byte dedicated user-lockable OTP area
Security Option0 = standard security, S = standard nonautomotive option
Package DetailsSF package, 16-pin SOP2 / SOIC, 300 mil body

Product Details

MT25QU256ABA8ESF-0SIT supplies 32 MiB of serial NOR for a 1.7–2.0 V flash rail. Its SF package exposes both RESET# and HOLD# through the pin-option-8 configuration. The host can use extended, dual or quad I/O protocols, with STR or DTR reads selected through the corresponding command and configuration registers.

The 166 MHz STR and 90 MHz DTR limits depend on instruction-specific dummy cycles. Micron provides a tuning-data pattern for adjusting the host sampling point above 133 MHz STR or 66 MHz DTR. Controller latency and sampling setup therefore matter alongside the maximum clock specification.

Access beyond the lowest 16 MiB requires the supported extended-address or four-byte path. Firmware updates must also distinguish the 256-byte program page from the 4 KiB, 32 KiB and 64 KiB erase units. The internal program/erase cycle and completion polling determine update progress after the serial transfer ends.

Quality · Shipping · Payment

Details

Quality Confirmation

Pre-shipment checks cover batch, package, labels and markings. Inspection photos and third-party inspection support are available on request.

Shipping

Worldwide delivery is supported. Carrier, lead time and buyer-appointed forwarder requirements are confirmed with the quotation.

Payment

Payment method, currency and trade terms are subject to the formal quotation or proforma invoice.