AT45DB041E-SHN-T

Mfr. #:
AT45DB041E-SHN-T
Mfr.:
Renesas Electronics
Product Type:
Serial Flash Memory
Series:
DataFlash
Package / Case:
8-SOIC-W
Description:
4 Mbit SPI DataFlash with dual SRAM buffers, configurable 264/256-byte pages, 1.65–3.6 V, 8-SOIC-W

Product Attributes

AttributeValue
Density4 Mbit plus 128 Kbit of extra user-accessible storage in 264-byte page mode
Organization2,048 pages, 264 bytes per page by default or 256 bytes per page when configured
InterfaceSingle SPI, modes 0 and 3
Clock FrequencyfSCK maximum 70 MHz at VCC = 1.65–3.6 V, 85 MHz at 2.3–3.6 V
Endurance100,000 program/erase cycles at −40 °C to +85 °C
Data Retention20 years
Supply Voltage1.65–3.6 V
Operating Temperature−40 °C to +85 °C
Continuous Read Clock1Bh opcode maximum 85 MHz at VCC = 1.65–3.6 V, 104 MHz at 2.3–3.6 V
SRAM BuffersTwo independent 256/264-byte buffers
Erase GranularityPage, 8-page block, sector or full chip
Page Programming Time3 ms maximum without erase at −40 °C to +85 °C
Page Erase And Program Time25 ms maximum for 256/264 bytes at −40 °C to +85 °C
ProtectionIndividual sector protection, permanent sector lockdown and hardware write-protect input
Security Register128-byte OTP, 64-byte factory unique identifier plus 64 user-programmable bytes
Package Details8-lead 208-mil EIAJ SOIC, 1.27 mm pitch

Product Details

AT45DB041E-SHN-T is a 4 Mbit SPI DataFlash for code storage and data logging. Its two independent SRAM buffers let the host collect data in one buffer while a page from the other buffer is programmed into the flash array. Sustained logging must account for the internally timed program operation and the amount of data arriving between page writes.

This ordering option starts with 264-byte pages, including eight extra user-accessible bytes per page. Firmware can configure 256-byte pages for binary addressing. The selected geometry determines how command addresses identify pages and byte positions, so firmware must use the configured format. The reversible setting survives power cycles and its configuration register supports up to 10,000 erase/program cycles.

Page erase and read-modify-write operations support updates to individual records. Sector protection and permanent sector lockdown allow fixed content and writable areas to coexist. Repeatedly updated records need an erase/program budget within the specified 100,000-cycle endurance over the industrial temperature range, together with busy-status handling so the host can detect completion and programming errors.

Quality · Shipping · Payment

Details

Quality Confirmation

Pre-shipment checks cover batch, package, labels and markings. Inspection photos and third-party inspection support are available on request.

Shipping

Worldwide delivery is supported. Carrier, lead time and buyer-appointed forwarder requirements are confirmed with the quotation.

Payment

Payment method, currency and trade terms are subject to the formal quotation or proforma invoice.