MT25QU256ABA8ESF-0SIT

制造商型号:
MT25QU256ABA8ESF-0SIT
制造商:
Micron Technology
产品类型:
NOR Flash
系列:
MT25QU
封装:
16-SOIC
描述:
256 Mbit SPI NOR flash, 1.7–2.0 V, 166 MHz STR, 16-SOIC

产品属性

属性数值
Density256 Mbit (32 MiB)
InterfaceSPI-compatible extended, Dual and Quad I/O, STR and DTR
Supply Voltage1.7–2.0 V
Operating TemperatureIT −40 °C to +85 °C
Read Clock166 MHz maximum STR; 90 MHz maximum DTR, command and dummy-cycle conditions apply
Read TimingTDP host-sampling adjustment supported above 133 MHz STR or 66 MHz DTR
Program Page Size256 bytes
Erase Geometry4 KiB and 32 KiB subsectors, 64 KiB sectors, bulk erase
Addressing3-byte address window with extended addressing or supported 4-byte mode/instructions
Reset / Hold PinsPin option 8 provides dedicated RESET# and HOLD#
Execute In PlaceXIP supported through configured read mode
SuspendProgram/erase suspend and resume
OTP64-byte dedicated user-lockable OTP area
Security Option0 = standard security, S = standard nonautomotive option
Package DetailsSF package, 16-pin SOP2 / SOIC, 300 mil body

产品详细说明

MT25QU256ABA8ESF-0SIT supplies 32 MiB of serial NOR for a 1.7–2.0 V flash rail. Its SF package exposes both RESET# and HOLD# through the pin-option-8 configuration. The host can use extended, dual or quad I/O protocols, with STR or DTR reads selected through the corresponding command and configuration registers.

The 166 MHz STR and 90 MHz DTR limits depend on instruction-specific dummy cycles. Micron provides a tuning-data pattern for adjusting the host sampling point above 133 MHz STR or 66 MHz DTR. Controller latency and sampling setup therefore matter alongside the maximum clock specification.

Access beyond the lowest 16 MiB requires the supported extended-address or four-byte path. Firmware updates must also distinguish the 256-byte program page from the 4 KiB, 32 KiB and 64 KiB erase units. The internal program/erase cycle and completion polling determine update progress after the serial transfer ends.

质量 · 运输 · 付款

详情

质量确认

发货前核对批次、封装、标签及丝印。可按需提供验货照片,并协助第三方检验。

运输

支持全球交付。承运商、交期及买方指定货代要求,在报价时确认。

付款

付款方式、币种及贸易条款,以正式报价或形式发票为准。