IRFB4127PBF

Mfr. #:
IRFB4127PBF
Mfr.:
Infineon Technologies
Product Type:
N-Channel MOSFET
Series:
IR MOSFET™
Package / Case:
3-TO220
Description:
N-channel MOSFET, 200 V VDS, 20 mΩ maximum RDS(on), 3-TO220

Product Attributes

AttributeValue
Drain-Source Voltage (VDS)200 V
Continuous Drain Current (ID)76 A maximum at TC = 25 °C and VGS = 10 V
RDS(on) max20 mΩ at VGS = 10 V and ID = 44 A
Gate Threshold Voltage (VGS(th))3 to 5 V
Total Gate Charge Qg100 nC typical at VGS = 10 V, ID = 44 A and VDS = 100 V
Power Dissipation375 W maximum at TC = 25 °C
Junction-to-case thermal resistance0.4 °C/W maximum
Operating Junction Temperature−55 °C to +175 °C
Package DetailsThree-lead through-hole TO-220 package

Product Details

IRFB4127PBF is a 200 V N-channel power MOSFET for hard-switched power conversion, synchronous rectification and inverter stages. Its 20 mΩ maximum on-resistance is specified with 10 V gate drive, 44 A drain current and a 25 °C junction, so conduction-loss estimates must use the resistance at the intended gate voltage and operating temperature rather than the headline current rating alone.

The 76 A continuous-current rating assumes a 25 °C case, while the 0.4 °C/W maximum junction-to-case resistance describes only the package portion of the thermal path. A typical 100 nC total gate charge creates a separate driver-current and switching-loss requirement. Heat-sink performance, switching frequency and gate-drive strength therefore determine the usable current in the final circuit.

Quality · Shipping · Payment

Details

Quality Confirmation

Pre-shipment checks cover batch, package, labels and markings. Inspection photos and third-party inspection support are available on request.

Shipping

Worldwide delivery is supported. Carrier, lead time and buyer-appointed forwarder requirements are confirmed with the quotation.

Payment

Payment method, currency and trade terms are subject to the formal quotation or proforma invoice.