TPH2R608NH

Mfr. #:
TPH2R608NH
Mfr.:
Toshiba Electronic Devices & Storage Corporation
Product Type:
N-Channel MOSFET
Series:
U-MOSVIII-H
Package / Case:
8-SOP Advance
Description:
75 V N-channel power MOSFET, 2.6 mΩ maximum at 10 V, 8-SOP Advance

Product Attributes

AttributeValue
FunctionSingle N-channel U-MOSVIII-H power MOSFET
Drain-Source Voltage75 V maximum
Gate-Source Voltage±20 V maximum
Drain Current150 A continuous rating; 168 A silicon limit at specified case conditions
On-Resistance2.6 mΩ maximum, 2.1 mΩ typical at VGS = 10 V, ID = 50 A, 25 °C
Total Gate Charge72 nC typical at VDD ≈ 37.5 V, VGS = 10 V, ID = 50 A
Input Capacitance4,600 pF typical at VDS = 37.5 V, 1 MHz
Channel Temperature150 °C maximum
Package DetailsToshiba SOP Advance (2-5Q1S), 8 pins, 5.0 × 6.0 × 0.95 mm

Product Details

TPH2R608NH is a 75 V N-channel power MOSFET for high-efficiency DC-DC converters and switching regulators. Its on-resistance is 2.6 mΩ maximum and 2.1 mΩ typical with 10 V gate drive at 50 A and 25 °C. Conduction-loss estimates must adjust that test-point resistance for the actual current and junction temperature.

The 72 nC typical total gate charge uses a 37.5 V drain condition, 10 V gate swing and 50 A current. A gate driver must move that charge at the switching frequency, so transition loss and driver power join channel conduction loss in the thermal budget.

The 168 A entry is a silicon limit under specified case conditions rather than a board-level continuous-current guarantee. The 8-pin SOP Advance package and PCB copper determine the usable heat path, and the load waveform must remain within the safe-operating-area and 150 °C channel-temperature limits.

Quality · Shipping · Payment

Details

Quality Confirmation

Pre-shipment checks cover batch, package, labels and markings. Inspection photos and third-party inspection support are available on request.

Shipping

Worldwide delivery is supported. Carrier, lead time and buyer-appointed forwarder requirements are confirmed with the quotation.

Payment

Payment method, currency and trade terms are subject to the formal quotation or proforma invoice.