W25Q256JWFIQ

Mfr. #:
W25Q256JWFIQ
Mfr.:
Winbond Electronics
Product Type:
Serial NOR Flash
Series:
W25Q-JW
Package / Case:
16-SOIC
Description:
256 Mbit Quad SPI NOR flash, 1.7–1.95 V, dedicated reset, 16-SOIC

Product Attributes

AttributeValue
Density256 Mbit (32 MiB)
InterfaceStandard, Dual and Quad SPI, IQ option
Supply Voltage1.7–1.95 V
Operating Temperature−40 °C to +85 °C, industrial I grade
Fast Read Clock133 MHz maximum for SPI EBh Quad I/O read; 104 MHz for other fast SPI instructions
Standard Read Clock50 MHz maximum for 03h/13h
Program Page Size256 bytes
Erase Geometry4 KiB sectors, 32 KiB / 64 KiB blocks, chip erase
Addressing3-byte window with extended-address register, 4-byte mode or dedicated 4-byte instructions
JEDEC IDEF 60 19h, IQ option
Quad EnableQE fixed at 1 for IQ
ResetDedicated hardware RESET# pin, independent of Quad SPI data pins
Security64-bit unique ID and three 256-byte security registers with OTP lock
SuspendProgram/erase suspend and resume
Package DetailsF package, 16-pin SOIC, 300 mil body

Product Details

W25Q256JWFIQ places 32 MiB of 1.7–1.95 V serial NOR in a 16-pin SOIC with a dedicated hardware reset input. That reset remains separate from the four SPI data lines, giving board control logic an independent way to reset the flash during quad operation. The IQ option has Quad Enable fixed on.

Its capacity requires an address strategy for the upper 16 MiB, using the extended-address register, four-byte mode or dedicated four-byte commands. The 133 MHz ceiling applies to the specified Quad I/O read command, while other instructions have lower limits. Firmware must keep the instruction, address width and latency settings consistent across boot and application access.

Quality · Shipping · Payment

Details

Quality Confirmation

Pre-shipment checks cover batch, package, labels and markings. Inspection photos and third-party inspection support are available on request.

Shipping

Worldwide delivery is supported. Carrier, lead time and buyer-appointed forwarder requirements are confirmed with the quotation.

Payment

Payment method, currency and trade terms are subject to the formal quotation or proforma invoice.