W25Q256JWFIQ

制造商型号:
W25Q256JWFIQ
制造商:
Winbond Electronics
产品类型:
Serial NOR Flash
系列:
W25Q-JW
封装:
16-SOIC
描述:
256 Mbit Quad SPI NOR flash, 1.7–1.95 V, dedicated reset, 16-SOIC

产品属性

属性数值
Density256 Mbit (32 MiB)
InterfaceStandard, Dual and Quad SPI, IQ option
Supply Voltage1.7–1.95 V
Operating Temperature−40 °C to +85 °C, industrial I grade
Fast Read Clock133 MHz maximum for SPI EBh Quad I/O read; 104 MHz for other fast SPI instructions
Standard Read Clock50 MHz maximum for 03h/13h
Program Page Size256 bytes
Erase Geometry4 KiB sectors, 32 KiB / 64 KiB blocks, chip erase
Addressing3-byte window with extended-address register, 4-byte mode or dedicated 4-byte instructions
JEDEC IDEF 60 19h, IQ option
Quad EnableQE fixed at 1 for IQ
ResetDedicated hardware RESET# pin, independent of Quad SPI data pins
Security64-bit unique ID and three 256-byte security registers with OTP lock
SuspendProgram/erase suspend and resume
Package DetailsF package, 16-pin SOIC, 300 mil body

产品详细说明

W25Q256JWFIQ places 32 MiB of 1.7–1.95 V serial NOR in a 16-pin SOIC with a dedicated hardware reset input. That reset remains separate from the four SPI data lines, giving board control logic an independent way to reset the flash during quad operation. The IQ option has Quad Enable fixed on.

Its capacity requires an address strategy for the upper 16 MiB, using the extended-address register, four-byte mode or dedicated four-byte commands. The 133 MHz ceiling applies to the specified Quad I/O read command, while other instructions have lower limits. Firmware must keep the instruction, address width and latency settings consistent across boot and application access.

质量 · 运输 · 付款

详情

质量确认

发货前核对批次、封装、标签及丝印。可按需提供验货照片,并协助第三方检验。

运输

支持全球交付。承运商、交期及买方指定货代要求,在报价时确认。

付款

付款方式、币种及贸易条款,以正式报价或形式发票为准。