TS5A9411DCKR

Mfr. #:
TS5A9411DCKR
Mfr.:
Texas Instruments
Product Type:
SPDT Analog Switch
Series:
TS5A9411
Package / Case:
6-SC70
Description:
Bidirectional 2:1 SPDT analog switch, 10 Ω maximum, 2.25–5.5 V, 6-SC70

Product Attributes

AttributeValue
ConfigurationSingle-channel 2:1 SPDT, bidirectional
Supply Voltage2.25 V to 5.5 V
On-Resistance5.3 Ω typical at 5 V; 10 Ω maximum over −40 °C to +85 °C
Bandwidth100 MHz typical, 50 Ω load
ON Capacitance8.5 pF typical at 1 MHz
Leakage Current±3 nA maximum over −40 °C to +85 °C
Switch Current±50 mA continuous; ±200 mA peak for 1 ms below 10% duty cycle
SwitchingBreak-before-make; 0.9 ns minimum over −40 °C to +85 °C at 5 V
Operating Temperature−40 °C to +85 °C
Package Details2.0 mm × 1.25 mm nominal body

Product Details

TS5A9411DCKR is a bidirectional single-channel SPDT switch, so it routes an analog node between normally open and normally closed paths without buffering or level conversion. Signals must remain between ground and VCC, and the ±50 mA continuous switch-current limit constrains loads even though the control input tolerates as much as 5.5 V.

At a 5 V supply its on-resistance is 5.3 Ω typical and 10 Ω maximum across temperature, which forms a divider with the load and adds source-dependent error. The 8.5 pF typical on-capacitance and 100 MHz small-signal bandwidth describe a different frequency-domain limit. Specified break-before-make switching prevents the two paths from being intentionally connected during selection, but the source and load still determine the resulting transient.

Quality · Shipping · Payment

Details

Quality Confirmation

Pre-shipment checks cover batch, package, labels and markings. Inspection photos and third-party inspection support are available on request.

Shipping

Worldwide delivery is supported. Carrier, lead time and buyer-appointed forwarder requirements are confirmed with the quotation.

Payment

Payment method, currency and trade terms are subject to the formal quotation or proforma invoice.