NVP6158C

Mfr. #:
NVP6158C
Mfr.:
Nextchip
Product Type:
Video Decoder
Series:
NVP6158
Package / Case:
88-EQFN

Product Attributes

AttributeValue
Video Input Channels4
Video Input FormatsCVBS / COMET; universal analog HD up to 8 MP at 7.5 fps
HD Input Modes1-2 MP at 25/30 fps; 3 MP at 18 fps; 4 MP at 15 fps; 5 MP at 12.5 fps; 8 MP at 7.5 fps
Digital Video Output8-bit BT.656 / BT.1120 YCbCr 4:2:2 byte-interleaved; BT.601 separate sync supported
Video Output Ports2, individually selectable output format
Audio Codec4 voice inputs, 1 microphone input and 1 playback channel
Audio Formats8/16-bit linear PCM; 8-bit G.711 A-law / mu-law
Audio InterfacesSSP / DSP / I2S, master or slave
Control InterfaceI2C, SCL 100 kHz typical / 400 kHz maximum
Reference Clock27 MHz typical; input duty cycle 45–55%
Supply VoltageVDD1A/VDD1D: 1.15 to 1.30 V, 1.2 V typical; VDD3A/VDD3D: 3.0 to 3.6 V, 3.3 V typical, recommended
Operating Temperature0 to +70 °C
Reset TimingActive-low RSTB pulse width at least 1 µs; release time 10 µs (datasheet Rev 0.0)
Package Details88-pin EQFN with exposed pad; 10 x 10 mm (PACKAGE dimensions from jlcpcb listing)

Product Details

NVP6158C is a Nextchip logic device.

This device performs a fixed digital function, with timing and drive strength given by the manufacturer.

This ordering code is specified at 88.

It is used in board-level logic and signal routing, where the part has to keep its specification over the life of the equipment.

The variant is defined by Video Input Formats CVBS / COMET; universal analog HD up to 8 MP at 7.5 fps and HD Input Modes 1-2 MP at 25/30 fps; 3 MP at 18 fps; 4 MP at 15 fps; 5 MP at 12.5 fps; 8 MP at 7.5 fps.

Its advantage is that the specification is published and stable, so the design does not depend on bench characterisation.

Quality · Shipping · Payment

Details

Quality Confirmation

Pre-shipment checks cover batch, package, labels and markings. Inspection photos and third-party inspection support are available on request.

Shipping

Worldwide delivery is supported. Carrier, lead time and buyer-appointed forwarder requirements are confirmed with the quotation.

Payment

Payment method, currency and trade terms are subject to the formal quotation or proforma invoice.