TPS62873Y1QWRXSRQ1

Mfr. #:
TPS62873Y1QWRXSRQ1
Mfr.:
Texas Instruments
Product Type:
Buck Converter
Series:
TPS6287x-Q1
Package / Case:
16-VQFN
Description:
15 A automotive synchronous buck converter with I2C and remote sensing, 2.7–6 V input, 16-VQFN

Product Attributes

AttributeValue
TopologySynchronous step-down, fixed-frequency DCS-Control
Input Voltage2.7–6 V
Output Current15 A, stackable for higher combined output current
Output Voltage0.4–1.675 V or 0.8–3.35 V across programmable ranges
Switching Frequency1.5, 2.25, 2.5 or 3 MHz, FSEL selected
ProtectionThermal warning, thermal shutdown and power-good window comparator
Operating Temperature−40 °C to +125 °C ambient, −40 °C to +150 °C junction
Output Voltage Step1.25, 2.5, 5 or 10 mV, selected by voltage range
Default Configuration0.800 V start-up and I2C address 0x43 with VSEL = 47 kΩ to VIN
InterfaceI2C, up to 1 MHz
FeedbackDifferential remote sensing
CompensationAdjustable external compensation
Operating ModesPower-save or forced PWM
QualificationAEC-Q100, temperature grade 1
Package DetailsRXS VQFN-FCRLF, 2.55 × 3.55 mm, wettable flanks

Product Details

TPS62873Y1QWRXSRQ1 supplies up to 15 A from a low-voltage automotive bus using a synchronous buck stage and fixed-frequency DCS-Control. Differential remote sensing regulates the voltage at the load connection, helping account for voltage loss in the high-current distribution path. External compensation and the output capacitor network determine the response to rapid load changes.

The Y1 variant includes an I2C interface for output programming. With VSEL connected to VIN through 47 kΩ, its documented start-up point is 0.800 V with address 0x43. That initial condition must suit the powered processor before software changes the voltage. Stacked operation supports higher combined current, with shared control, phase timing and layout following the documented multi-device connection.

Quality · Shipping · Payment

Details

Quality Confirmation

Pre-shipment checks cover batch, package, labels and markings. Inspection photos and third-party inspection support are available on request.

Shipping

Worldwide delivery is supported. Carrier, lead time and buyer-appointed forwarder requirements are confirmed with the quotation.

Payment

Payment method, currency and trade terms are subject to the formal quotation or proforma invoice.