TPS62873Y1QWRXSRQ1

制造商型号:
TPS62873Y1QWRXSRQ1
制造商:
Texas Instruments
产品类型:
Buck Converter
系列:
TPS6287x-Q1
封装:
16-VQFN
描述:
15 A automotive synchronous buck converter with I2C and remote sensing, 2.7–6 V input, 16-VQFN

产品属性

属性数值
TopologySynchronous step-down, fixed-frequency DCS-Control
Input Voltage2.7–6 V
Output Current15 A, stackable for higher combined output current
Output Voltage0.4–1.675 V or 0.8–3.35 V across programmable ranges
Switching Frequency1.5, 2.25, 2.5 or 3 MHz, FSEL selected
ProtectionThermal warning, thermal shutdown and power-good window comparator
Operating Temperature−40 °C to +125 °C ambient, −40 °C to +150 °C junction
Output Voltage Step1.25, 2.5, 5 or 10 mV, selected by voltage range
Default Configuration0.800 V start-up and I2C address 0x43 with VSEL = 47 kΩ to VIN
InterfaceI2C, up to 1 MHz
FeedbackDifferential remote sensing
CompensationAdjustable external compensation
Operating ModesPower-save or forced PWM
QualificationAEC-Q100, temperature grade 1
Package DetailsRXS VQFN-FCRLF, 2.55 × 3.55 mm, wettable flanks

产品详细说明

TPS62873Y1QWRXSRQ1 supplies up to 15 A from a low-voltage automotive bus using a synchronous buck stage and fixed-frequency DCS-Control. Differential remote sensing regulates the voltage at the load connection, helping account for voltage loss in the high-current distribution path. External compensation and the output capacitor network determine the response to rapid load changes.

The Y1 variant includes an I2C interface for output programming. With VSEL connected to VIN through 47 kΩ, its documented start-up point is 0.800 V with address 0x43. That initial condition must suit the powered processor before software changes the voltage. Stacked operation supports higher combined current, with shared control, phase timing and layout following the documented multi-device connection.

质量 · 运输 · 付款

详情

质量确认

发货前核对批次、封装、标签及丝印。可按需提供验货照片,并协助第三方检验。

运输

支持全球交付。承运商、交期及买方指定货代要求,在报价时确认。

付款

付款方式、币种及贸易条款,以正式报价或形式发票为准。