TLC69628QRTQRQ1

Mfr. #:
TLC69628QRTQRQ1
Mfr.:
Texas Instruments
Product Type:
LED driver
Series:
TLC69628-Q1
Package / Case:
56-VQFN
Description:
Automotive 48-channel constant-current LED driver, 60 mA/channel, 56-VQFN

Product Attributes

AttributeValue
Output CurrentUp to 60 mA per channel
Output VoltageUp to 16 V
Control InterfaceSPI, up to 17 Mb/s data rate
Operating Temperature−40 °C to +125 °C ambient
Function48-channel constant-current LED sink driver for local dimming
PWM Resolution16-bit programmable PWM or hybrid dimming
Dot Correction7-bit analog per channel
OscillatorIntegrated 33 MHz
Refresh RateOver 20 kHz with enhanced-spectrum PWM
DiagnosticsLED open/short, adjacent output short, communication and device faults
Automotive QualificationAEC-Q100 Grade 1
Package DetailsRTQ 56-pin wettable-flank VQFN, 8 × 8 mm, 0.5 mm terminal pitch, exposed thermal pad

Product Details

TLC69628QRTQRQ1 is an automotive 48-channel constant-current sink driver for local-dimming LED backlights. Each output can be set with 16-bit PWM or hybrid dimming and 7-bit analog dot correction, allowing the controller to adjust both temporal brightness and channel-to-channel peak current. The 60 mA per-channel and 16 V output limits set the electrical envelope for the selected LED strings.

SPI carries the brightness data through a daisy chain, while the integrated 33 MHz oscillator provides local timing. Enhanced-spectrum PWM can refresh above 20 kHz; the selected frame rate still depends on the complete chain and programming. Adaptive headroom voltage control uses feedback from the last device's OUT47 pin to help the external LED supply track the string voltage requirement, so that feedback connection matters in a multi-device design.

Open- and short-LED checks, adjacent-output short detection and communication/device diagnostics help locate faults in a display array. The exact RTQ order uses a 56-pin, 8 × 8 mm wettable-flank VQFN with an exposed thermal pad and is specified for −40 °C to +125 °C ambient operation. Channel dissipation and PCB heat removal therefore need review at the intended current and LED rail voltage.

Quality · Shipping · Payment

Details

Quality Confirmation

Pre-shipment checks cover batch, package, labels and markings. Inspection photos and third-party inspection support are available on request.

Shipping

Worldwide delivery is supported. Carrier, lead time and buyer-appointed forwarder requirements are confirmed with the quotation.

Payment

Payment method, currency and trade terms are subject to the formal quotation or proforma invoice.