MCP1416T-E/OT

Mfr. #:
MCP1416T-E/OT
Mfr.:
Microchip Technology
Product Type:
MOSFET Gate Driver
Series:
MCP1415/16
Package / Case:
5-SOT-23
Description:
1.5 A non-inverting MOSFET gate driver, 4.5–18 V, 5-SOT-23

Product Attributes

AttributeValue
Supply Voltage4.5 V to 18 V
Operating Temperature−40 °C to +125 °C (E grade)
ConfigurationSingle-channel non-inverting low-side MOSFET gate driver
Peak Output Current1.5 A typical at VDD = 18 V
Input CompatibilityTTL or CMOS logic, 3 V to 18 V
Rise Time18 ns typical, 25 ns maximum at 18 V and 1,000 pF, 25 °C
Fall Time21 ns typical, 28 ns maximum at 18 V and 1,000 pF, 25 °C
Propagation Delay44 ns typical input-to-output rise; 54 ns typical MCP1416 output-fall path at stated test conditions
Reverse-Current Withstand500 mA minimum with duty cycle ≤ 2% and pulse ≤ 300 µs
Package Details5-lead SOT-23 (OT), tape-and-reel order

Product Details

MCP1416T-E/OT is a single non-inverting MOSFET gate driver that sources or sinks up to 1.5 A typical from a 4.5 V to 18 V supply. The driver converts the logic command into the current pulse needed to charge and discharge the MOSFET gate, so gate charge, switching frequency and supply voltage determine both transition time and driver dissipation.

With a 1,000 pF test load at 18 V, the data sheet gives 18 ns typical rise and 21 ns typical fall times at 25 °C. Real power-MOSFET gate charge and board inductance change those edges; the bypass capacitor and driver-to-gate loop therefore need to be short, and damping may be required when ringing exceeds device limits.

The T-E/OT code selects the standard non-inverting pinout, tape-and-reel packing, −40 °C to +125 °C grade and 5-lead SOT-23. It is not pin-function equivalent to the R variant, and it does not provide the inverted logic response of MCP1415.

Quality · Shipping · Payment

Details

Quality Confirmation

Pre-shipment checks cover batch, package, labels and markings. Inspection photos and third-party inspection support are available on request.

Shipping

Worldwide delivery is supported. Carrier, lead time and buyer-appointed forwarder requirements are confirmed with the quotation.

Payment

Payment method, currency and trade terms are subject to the formal quotation or proforma invoice.