L7805CV-DG

Mfr. #:
L7805CV-DG
Mfr.:
STMicroelectronics
Product Type:
Linear Voltage Regulator
Series:
L78
Package / Case:
3-TO-220
Description:
Fixed 5 V positive linear regulator, up to 1.5 A with heat sinking, dual-gauge TO-220

Product Attributes

AttributeValue
Input Voltage7–18 V for specified output at 5 mA–1 A load
Output Voltage5 V nominal; 4.75–5.25 V at 7–18 V input, 5 mA–1 A load
Output CurrentUp to 1.5 A with adequate heat sinking
Dropout Voltage2 V typ at 1 A, TJ = 25 °C
ProtectionCurrent limiting, thermal shutdown and output-transistor SOA protection
FunctionFixed Positive Linear Voltage Regulator
Absolute Maximum Input Voltage35 V (stress rating; not a regulation range)
Minimum Load Current5 mA for regulation
Line Regulation50 mV max at 8–12 V input, TJ = 25 °C
Load Regulation100 mV max at 5 mA–1.5 A load, TJ = 25 °C
Junction Temperature0–125 °C operating
Thermal Resistance5 °C/W junction to case (TO-220)
Package DetailsTO-220 (dual gauge, through-hole, 3-pin)

Product Details

L7805CV-DG is STMicroelectronics' L78 fixed positive linear regulator for a nominal 5 V rail. In the L7805C specified window of 7–18 V input and 5 mA–1 A load, its output is 4.75–5.25 V. The 5 mA minimum load and 2 V typical dropout at 1 A set further limits when choosing the input supply and load range.

A linear regulator dissipates approximately the input-to-output voltage difference multiplied by load current, so available current depends on the input voltage and cooling. ST specifies output current up to 1.5 A with adequate heat sinking; the TO-220 junction-to-case thermal resistance is 5 °C/W and the C-grade operating junction range is 0–125 °C. Internal current limiting, safe-area protection and thermal shutdown address overloads, while the 35 V absolute-maximum input is a stress limit rather than the specified regulation window.

The -DG ordering suffix selects the dual-gauge TO-220 lead form; ST lists L7805CV as the separate single-gauge order. Both use the L7805C electrical table, but their mechanical drawings differ. Compare the selected package drawing with the board and assembly before substituting one ordering code for the other.

Quality · Shipping · Payment

Details

Quality Confirmation

Pre-shipment checks cover batch, package, labels and markings. Inspection photos and third-party inspection support are available on request.

Shipping

Worldwide delivery is supported. Carrier, lead time and buyer-appointed forwarder requirements are confirmed with the quotation.

Payment

Payment method, currency and trade terms are subject to the formal quotation or proforma invoice.