L7805CV-DG

制造商型号:
L7805CV-DG
制造商:
STMicroelectronics
产品类型:
Linear Voltage Regulator
系列:
L78
封装:
3-TO-220
描述:
Fixed 5 V positive linear regulator, up to 1.5 A with heat sinking, dual-gauge TO-220

产品属性

属性数值
Input Voltage7–18 V for specified output at 5 mA–1 A load
Output Voltage5 V nominal; 4.75–5.25 V at 7–18 V input, 5 mA–1 A load
Output CurrentUp to 1.5 A with adequate heat sinking
Dropout Voltage2 V typ at 1 A, TJ = 25 °C
ProtectionCurrent limiting, thermal shutdown and output-transistor SOA protection
FunctionFixed Positive Linear Voltage Regulator
Absolute Maximum Input Voltage35 V (stress rating; not a regulation range)
Minimum Load Current5 mA for regulation
Line Regulation50 mV max at 8–12 V input, TJ = 25 °C
Load Regulation100 mV max at 5 mA–1.5 A load, TJ = 25 °C
Junction Temperature0–125 °C operating
Thermal Resistance5 °C/W junction to case (TO-220)
Package DetailsTO-220 (dual gauge, through-hole, 3-pin)

产品详细说明

L7805CV-DG is STMicroelectronics' L78 fixed positive linear regulator for a nominal 5 V rail. In the L7805C specified window of 7–18 V input and 5 mA–1 A load, its output is 4.75–5.25 V. The 5 mA minimum load and 2 V typical dropout at 1 A set further limits when choosing the input supply and load range.

A linear regulator dissipates approximately the input-to-output voltage difference multiplied by load current, so available current depends on the input voltage and cooling. ST specifies output current up to 1.5 A with adequate heat sinking; the TO-220 junction-to-case thermal resistance is 5 °C/W and the C-grade operating junction range is 0–125 °C. Internal current limiting, safe-area protection and thermal shutdown address overloads, while the 35 V absolute-maximum input is a stress limit rather than the specified regulation window.

The -DG ordering suffix selects the dual-gauge TO-220 lead form; ST lists L7805CV as the separate single-gauge order. Both use the L7805C electrical table, but their mechanical drawings differ. Compare the selected package drawing with the board and assembly before substituting one ordering code for the other.

质量 · 运输 · 付款

详情

质量确认

发货前核对批次、封装、标签及丝印。可按需提供验货照片,并协助第三方检验。

运输

支持全球交付。承运商、交期及买方指定货代要求,在报价时确认。

付款

付款方式、币种及贸易条款,以正式报价或形式发票为准。