IMX307LQR-C

Mfr. #:
IMX307LQR-C
Mfr.:
Sony
Product Type:
CMOS Image Sensor
Series:
IMX307LQR
Package / Case:
110-LGA
Description:
2.13 MP Type 1/2.8 color CMOS image sensor, 1080p at 60 fps, 110-LGA

Product Attributes

AttributeValue
Optical FormatType 1/2.8; 6.46 mm diagonal
Effective Pixels1945 × 1097 (approximately 2.13 MP)
Active Pixel Array1937 × 1097 (approximately 2.12 MP)
Recommended Recording Pixels1920 × 1080 (approximately 2.07 MP)
Pixel Size2.9 × 2.9 µm
Color FilterR, G and B primary color mosaic
Maximum Frame Rate60 fps in Full HD 1080p mode
ADC Resolution10 bit / 12 bit
Output InterfaceLow-voltage serial LVDS DDR, 2 or 4 channels; MIPI CSI-2, 2 or 4 lanes
Output FormatRAW10 / RAW12
WDR ModesMultiple-exposure WDR; digital-overlap WDR
Input Clock Frequency37.125 MHz / 74.25 MHz
Supply VoltageAnalog 2.8–3.0 V (2.9 V typical); interface 1.7–1.9 V (1.8 V typical); digital 1.1–1.3 V (1.2 V typical)
Temperature RangePerformance guarantee −10 °C to +60 °C; operating guarantee −30 °C to +85 °C
Package Details12.00 × 9.30 mm package outline

Product Details

IMX307LQR-C is a color CMOS image sensor for surveillance, factory-automation and industrial cameras. Its Type 1/2.8 optical format contains 1945 × 1097 effective pixels on a 2.9 µm pitch, while the recommended recording window is 1920 × 1080. Lens coverage, shading correction and the image-signal processor therefore need to follow the documented optical and pixel geometry rather than treating the package outline as the active image area.

Full-HD all-pixel readout reaches 60 frames per second with 10-bit or 12-bit conversion. The sensor can send RAW10 or RAW12 over either two- or four-channel low-voltage serial LVDS DDR, or two- or four-lane MIPI CSI-2, so the receiver lane count, data rate, bit depth and input-clock setting must be configured as one interface choice. Multiple-exposure and digital-overlap WDR modes also require compatible exposure timing and downstream image processing.

The device uses separate analog, interface and digital rails centered at 2.9 V, 1.8 V and 1.2 V. Sony distinguishes the −10 °C to +60 °C performance-guarantee range from the wider −30 °C to +85 °C operating-guarantee range, so characterized imaging performance should not be assumed across the wider interval. The LQR variant uses a 110-pin LGA with a 12.00 × 9.30 mm outline, making optical alignment and the exact land pattern part of the camera-module design.

Quality · Shipping · Payment

Details

Quality Confirmation

Pre-shipment checks cover batch, package, labels and markings. Inspection photos and third-party inspection support are available on request.

Shipping

Worldwide delivery is supported. Carrier, lead time and buyer-appointed forwarder requirements are confirmed with the quotation.

Payment

Payment method, currency and trade terms are subject to the formal quotation or proforma invoice.