SIT1044QT/3
- Mfr. #:
- SIT1044QT/3
- Mfr.:
- SIT
- Product Type:
- CAN FD Transceiver
- Series:
- SIT1044Q
- Package / Case:
- SOP-8
- Description:
- 5 Mbps CAN FD transceiver with standby wake-up and a dedicated VIO interface.
Product Attributes
| Attribute | Value |
|---|---|
| Data Rate | Up to 5 Mbps CAN FD data phase |
| Supply Current | VCC standby current: 5 uA maximum; STB=VCC, TXD=VIO. VIO standby current: 14 uA typical, 28 uA maximum; VCC=VIO=5 V, 25 C typical conditions |
| Operating Temperature | -40 to +125 C ambient; -40 to +150 C junction |
| Protocol | CAN FD; ISO 11898-2:2016 |
| Transmitter / Receiver Channels | 1 driver / 1 receiver |
| Supply Voltage (VCC) | 4.75 to 5.25 V |
| Logic Interface | VIO=2.95 to 5.25 V; supports 3.3 V and 5 V MCUs |
| Bus Fault Voltage | CANH/CANL: -40 to +40 V absolute bus-pin limit |
| Receiver Common-Mode Range | -12 to +12 V |
| Operating Modes | Normal and low-power standby; remote CAN wake-up |
| Propagation Delay | TXD-to-RXD loop: 80/90 ns typical, 220 ns maximum; RL=60 ohm, CL=100 pF, CRXD=15 pF, VCC=VIO=5 V, 25 C typical conditions |
| Protection | TXD dominant timeout, thermal shutdown and VCC/VIO undervoltage protection |
| Receiver Threshold | Recessive <=0.5 V; dominant >=0.9 V in normal mode; common mode -12 to +12 V |
| Qualification | AEC-Q100 qualified, per manufacturer datasheet |
| Package Details | 8-pin SOP; body 4.9 x 3.9 mm typical; lead span 6.0 mm typical; pitch 1.27 mm; height 1.8 mm maximum |
