SIT1043QTK
- Mfr. #:
- SIT1043QTK
- Mfr.:
- SIT
- Product Type:
- CAN FD Transceiver
- Series:
- SIT1043Q
- Package / Case:
- DFN-14
- Description:
- 5 Mbps CAN FD transceiver with local/remote wake-up and system power control and a dedicated VIO interface.
Product Attributes
| Attribute | Value |
|---|---|
| Data Rate | Up to 5 Mbps CAN FD data phase |
| Supply Current | Sleep IBAT: 16 uA typical, 30 uA maximum; VCC=VIO=INH=0 V, WAKE=VBAT; typical VBAT=12 V and 25 C |
| Operating Temperature | -40 to +125 C ambient; -40 to +150 C junction |
| Protocol | CAN FD; ISO 11898-2:2016 |
| Transmitter / Receiver Channels | 1 driver / 1 receiver |
| Supply Voltage (VCC) | 4.5 to 5.5 V |
| Logic Interface | VIO=2.8 to 5.5 V; supports 3.3 V and 5 V MCUs |
| Bus Fault Voltage | CANH/CANL: -58 to +58 V absolute bus-pin limit |
| Receiver Common-Mode Range | -30 to +30 V in normal mode |
| Operating Modes | Normal, silent, standby, go-to-sleep and sleep; local/remote wake-up |
| Propagation Delay | TXD-to-RXD loop: 40 to 160 ns low transition; 40 to 175 ns high transition; VCC=VIO=5 V, RL=60 ohm; design-guaranteed timing |
| Protection | TXD dominant timeout, thermal shutdown and VCC/VIO undervoltage protection |
| Receiver Threshold | 0.5 to 0.9 V in normal mode, common mode -30 to +30 V |
| Qualification | AEC-Q100 qualified, per manufacturer datasheet |
| Supply Voltage (VBAT) | 4.5 to 40 V |
| Control / Diagnostics | EN, STBN, INH, ERRN and WAKE pins; SPLIT common-mode stabilization output present in this non-/1 variant |
| Package Details | 14-terminal DFN; 4.5 x 3.0 mm nominal; pitch 0.65 mm; height 0.85 mm nominal, 0.9 mm maximum |
