MPM3695GRF-25-0022

Mfr. #:
MPM3695GRF-25-0022
Mfr.:
Monolithic Power Systems
Product Type:
DC-DC Power Module
Series:
MPM3695-25
Package / Case:
59-QFN
Description:
20 A continuous, 25 A peak PMBus buck power module, 4–16 V input with internal bias, 59-QFN

Product Attributes

AttributeValue
TopologyIntegrated synchronous step-down power module
Input Voltage4–16 V with internal VCC, 3–16 V with external 3.3 V VCC
Output Voltage0.5–5.5 V
Output Current20 A continuous, 25 A peak, subject to thermal conditions
Switching Frequency400, 600, 800 or 1000 kHz, 600 kHz default
Control MethodAdaptive multiphase constant-on-time (MCOT)
ProtectionOvercurrent, output overvoltage/undervoltage and overtemperature
External Bias3.12–3.6 V VCC
InterfacePMBus 1.3
Factory Register Image-0022 default configuration, VOUT_COMMAND = 1.8 V
FeedbackDifferential remote output-voltage sense
TelemetryVIN, VOUT, IOUT, temperature and faults
Parallel OperationAutomatic interleaving for multiphase connection
Junction Temperature−40 °C to +125 °C operating
Manufacturer LifecycleNRND per MPS datasheet
Package Details10 × 12 × 4 mm

Product Details

MPM3695GRF-25-0022 is a synchronous buck power module rated for 20 A continuous output and 25 A peak operation. Adaptive multiphase constant-on-time control and automatic interleaving support parallel modules when a rail needs higher current. Differential output sensing helps regulate the voltage at the load, while the PCB thermal path determines usable continuous current.

The -0022 suffix identifies the factory default MTP register configuration. PMBus provides voltage programming, mode selection and telemetry, and the external feedback divider must agree with the configured voltage scaling. The default register map sets VOUT_COMMAND to 1.8 V. This configuration needs review when servicing an existing rail with stored limits, sequencing and control settings.

Input operation down to 3 V uses an external 3.3 V VCC supply, while the internal-bias input range starts at 4 V. The continuous and peak current ratings must be checked at the intended input/output ratio and cooling condition. MPS assigns this device NRND lifecycle guidance in the current manufacturer datasheet.

Quality · Shipping · Payment

Details

Quality Confirmation

Pre-shipment checks cover batch, package, labels and markings. Inspection photos and third-party inspection support are available on request.

Shipping

Worldwide delivery is supported. Carrier, lead time and buyer-appointed forwarder requirements are confirmed with the quotation.

Payment

Payment method, currency and trade terms are subject to the formal quotation or proforma invoice.