ADA4941-1YCPZ-R7

Mfr. #:
ADA4941-1YCPZ-R7
Mfr.:
Analog Devices
Product Type:
Differential Amplifier
Package / Case:
8-LFCSP
Description:
Single-ended-to-differential ADC driver with adjustable gain and a reference-controlled output common-mode level.

Product Attributes

AttributeValue
Bandwidth31 MHz typ at 0.1 V p-p, 7 MHz typ at 2 V p-p, VS = 5 V, G = 2
Supply Voltage2.7 to 12 V total supply
Quiescent Current2.2 mA typ at 3 V
Operating Temperature-40 to +125 °C
Amplifier FunctionSingle-ended-to-differential ADC driver
Differential Gain2 V/V without external gain resistors, adjustable above 2 V/V
Input Resistance24 MΩ typ at IN and REF
Input Common-Mode Range0.2 to 3.9 V at VS = 5 V, G = 2
Settling Time610 ns typ to 0.005%, 6 V p-p step, VS = 5 V, G = 2
Output Voltage Noise10.2 nV/√Hz typ at 100 kHz, VS = 5 V, G = 2
Differential Output Offset0.8 mV max at TA = 25 °C, VS = 5 V, G = 2
Output Common-Mode ControlSet by REF input
Disable ControlActive high, outputs retain a driven state
Package Details8-lead LFCSP with exposed pad (CP-8-13), 3 × 3 mm body, 0.5 mm pitch

Product Details

ADA4941-1YCPZ-R7 converts a single-ended signal into complementary outputs for a differential ADC. Connecting OUT+ to FB gives a differential gain of 2 without an external gain network. Two external resistors can raise that gain when the input span needs more amplification.

The REF input sets the output common-mode level. Setting it to the input signal's midpoint centers the two outputs together and makes effective use of the available differential swing. The input range and each output's headroom still have to fit the selected supply.

Speed depends on signal amplitude as well as gain. At a 5 V supply and gain of 2, typical bandwidth is 31 MHz for a 0.1 V p-p output and 7 MHz for 2 V p-p. ADC acquisition timing therefore needs to account for the required output excursion and settling behavior.

Quality · Shipping · Payment

Details

Quality Confirmation

Pre-shipment checks cover batch, package, labels and markings. Inspection photos and third-party inspection support are available on request.

Shipping

Worldwide delivery is supported. Carrier, lead time and buyer-appointed forwarder requirements are confirmed with the quotation.

Payment

Payment method, currency and trade terms are subject to the formal quotation or proforma invoice.