ADA4941-1YCPZ-R7

制造商型号:
ADA4941-1YCPZ-R7
制造商:
Analog Devices
产品类型:
Differential Amplifier
封装:
8-LFCSP
描述:
Single-ended-to-differential ADC driver with adjustable gain and a reference-controlled output common-mode level.

产品属性

属性数值
Bandwidth31 MHz typ at 0.1 V p-p, 7 MHz typ at 2 V p-p, VS = 5 V, G = 2
Supply Voltage2.7 to 12 V total supply
Quiescent Current2.2 mA typ at 3 V
Operating Temperature-40 to +125 °C
Amplifier FunctionSingle-ended-to-differential ADC driver
Differential Gain2 V/V without external gain resistors, adjustable above 2 V/V
Input Resistance24 MΩ typ at IN and REF
Input Common-Mode Range0.2 to 3.9 V at VS = 5 V, G = 2
Settling Time610 ns typ to 0.005%, 6 V p-p step, VS = 5 V, G = 2
Output Voltage Noise10.2 nV/√Hz typ at 100 kHz, VS = 5 V, G = 2
Differential Output Offset0.8 mV max at TA = 25 °C, VS = 5 V, G = 2
Output Common-Mode ControlSet by REF input
Disable ControlActive high, outputs retain a driven state
Package Details8-lead LFCSP with exposed pad (CP-8-13), 3 × 3 mm body, 0.5 mm pitch

产品详细说明

ADA4941-1YCPZ-R7 converts a single-ended signal into complementary outputs for a differential ADC. Connecting OUT+ to FB gives a differential gain of 2 without an external gain network. Two external resistors can raise that gain when the input span needs more amplification.

The REF input sets the output common-mode level. Setting it to the input signal's midpoint centers the two outputs together and makes effective use of the available differential swing. The input range and each output's headroom still have to fit the selected supply.

Speed depends on signal amplitude as well as gain. At a 5 V supply and gain of 2, typical bandwidth is 31 MHz for a 0.1 V p-p output and 7 MHz for 2 V p-p. ADC acquisition timing therefore needs to account for the required output excursion and settling behavior.

质量 · 运输 · 付款

详情

质量确认

发货前核对批次、封装、标签及丝印。可按需提供验货照片,并协助第三方检验。

运输

支持全球交付。承运商、交期及买方指定货代要求,在报价时确认。

付款

付款方式、币种及贸易条款,以正式报价或形式发票为准。