AD8013ARZ-14-R7

Mfr. #:
AD8013ARZ-14-R7
Mfr.:
Analog Devices
Product Type:
Video Amplifier
Package / Case:
14-SOIC
Description:
Triple current-feedback video amplifier with independent channel disable in a 14-lead narrow SOIC.

Product Attributes

AttributeValue
Channels3
Bandwidth140 MHz typical (−3 dB), gain +2, no peaking, ±5 V, RL = 150 Ω
Slew Rate1,000 V/µs typical, 6 V step, ±5 V, RL = 150 Ω
Input Voltage Noise3.5 nV/√Hz typical at 10 kHz, +5 V or ±5 V
Supply Voltage+4.2 to +13 V single supply or ±2.1 to ±6.5 V dual supply
Quiescent Current3.4 mA typical, 4.0 mA maximum per amplifier at ±5 V
Operating Temperature−40°C to +85°C
Amplifier TopologyCurrent feedback
Settling Time18 ns typical to 0.1%, 0 to +2 V step, ±5 V, RL = 150 Ω
Output Current30 mA typical per amplifier at +5 V
Channel DisableIndependent disable; high-impedance output state
Package Details14-lead narrow-body SOIC (R-14), 8.65 × 3.90 mm nominal body, 1.27 mm pitch

Product Details

AD8013ARZ-14-R7 drives three video paths with current-feedback amplifiers intended for back-terminated 150 Ω loads. This load-driving role makes the required signal amplitude and termination important when evaluating each channel's output capability.

Small-signal bandwidth and large-signal transitions impose different speed constraints. At gain +2 and ±5 V supplies, the typical bandwidth is 140 MHz without peaking. For a 6 V step at ±5 V, the typical slew rate is 1,000 V/µs, which limits how quickly a large output excursion can change.

Independent channel-disable inputs place inactive outputs in a high-impedance state. That behavior allows the amplifiers to form a video multiplexer, with channel selection controlled through the disable inputs.

Quality · Shipping · Payment

Details

Quality Confirmation

Pre-shipment checks cover batch, package, labels and markings. Inspection photos and third-party inspection support are available on request.

Shipping

Worldwide delivery is supported. Carrier, lead time and buyer-appointed forwarder requirements are confirmed with the quotation.

Payment

Payment method, currency and trade terms are subject to the formal quotation or proforma invoice.