AD8013ARZ-14-R7

制造商型号:
AD8013ARZ-14-R7
制造商:
Analog Devices
产品类型:
Video Amplifier
封装:
14-SOIC
描述:
Triple current-feedback video amplifier with independent channel disable in a 14-lead narrow SOIC.

产品属性

属性数值
Channels3
Bandwidth140 MHz typical (−3 dB), gain +2, no peaking, ±5 V, RL = 150 Ω
Slew Rate1,000 V/µs typical, 6 V step, ±5 V, RL = 150 Ω
Input Voltage Noise3.5 nV/√Hz typical at 10 kHz, +5 V or ±5 V
Supply Voltage+4.2 to +13 V single supply or ±2.1 to ±6.5 V dual supply
Quiescent Current3.4 mA typical, 4.0 mA maximum per amplifier at ±5 V
Operating Temperature−40°C to +85°C
Amplifier TopologyCurrent feedback
Settling Time18 ns typical to 0.1%, 0 to +2 V step, ±5 V, RL = 150 Ω
Output Current30 mA typical per amplifier at +5 V
Channel DisableIndependent disable; high-impedance output state
Package Details14-lead narrow-body SOIC (R-14), 8.65 × 3.90 mm nominal body, 1.27 mm pitch

产品详细说明

AD8013ARZ-14-R7 drives three video paths with current-feedback amplifiers intended for back-terminated 150 Ω loads. This load-driving role makes the required signal amplitude and termination important when evaluating each channel's output capability.

Small-signal bandwidth and large-signal transitions impose different speed constraints. At gain +2 and ±5 V supplies, the typical bandwidth is 140 MHz without peaking. For a 6 V step at ±5 V, the typical slew rate is 1,000 V/µs, which limits how quickly a large output excursion can change.

Independent channel-disable inputs place inactive outputs in a high-impedance state. That behavior allows the amplifiers to form a video multiplexer, with channel selection controlled through the disable inputs.

质量 · 运输 · 付款

详情

质量确认

发货前核对批次、封装、标签及丝印。可按需提供验货照片,并协助第三方检验。

运输

支持全球交付。承运商、交期及买方指定货代要求,在报价时确认。

付款

付款方式、币种及贸易条款,以正式报价或形式发票为准。