全部型号

TPS1H100AQPWPRQ1

制造商型号：
TPS1H100AQPWPRQ1
制造商：
Texas Instruments
产品类型：
High-Side Switch
系列：
TPS1H100-Q1
封装：
14-HTSSOP
描述：
Automotive single-channel high-side switch with adjustable current limiting and digital fault status.

产品属性

属性数值
ProtectionOverload, short circuit and thermal shutdown
Channels1
Operating Voltage5 to 40 V nominal; 3.5 to 5 V extended
On Resistance80 mΩ typical; 100 mΩ maximum at VS > 5 V, TJ = 25 °C
Current LimitProgrammable with an external resistor
DiagnosticsOpen-drain digital status output, A variant
Operating Ambient Temperature-40 to 125 °C
Automotive QualificationAEC-Q100 Grade 1
Package Details14-HTSSOP (PWP)

产品详细说明

TPS1H100AQPWPRQ1 is the A-version, single-channel automotive high-side switch in a 14-pin PWP HTSSOP package, combining an NMOS power FET with control and protection circuits.

Its 5-to-40-V nominal operating span extends down to 3.5 V with increased on resistance; the typical resistance is 80 milliohms at 25 degrees C and supplies above 5 V.

An external resistor sets the current limit, so inrush and short-circuit behavior can be matched to the wiring and load instead of relying on a fixed threshold.

The A variant reports faults through an open-drain status pin, unlike the B variant's analog current-sense output, making the MCU interface a decisive ordering-code difference.

Overload detection and thermal shutdown protect the switch, while the specified -40-to-125-degree-C ambient range bounds automotive operation.

质量 · 运输 · 付款

详情

质量确认

发货前核对批次、封装、标签及丝印。可按需提供验货照片，并协助第三方检验。

运输

支持全球交付。承运商、交期及买方指定货代要求，在报价时确认。

付款

付款方式、币种及贸易条款，以正式报价或形式发票为准。

查看全部