TPS4H000AQPWPRQ1

制造商型号:
TPS4H000AQPWPRQ1
制造商:
Texas Instruments
产品类型:
High-Side Switch
系列:
TPS4H000
封装:
20-HTSSOP
描述:
Four-channel automotive high-side switch for lower-current loads with open-drain fault status.

产品属性

属性数值
Output Current0.75 A maximum per channel
Operating Temperature-40 °C to +125 °C ambient
Channels4
Operating Voltage3.4 V to 40 V
On-Resistance1 Ω typical per channel
Current Limit0.1 A to 1.3 A, adjustable
Version A OutputOpen-drain status
QualificationAEC-Q100 grade 1
Package DetailsHTSSOP (PWP), 20 pins, 6.5 × 6.4 mm

产品详细说明

TPS4H000AQPWPRQ1 is Texas Instruments' four-channel automotive high-side switch for modest-current loads, packaged as a 20-pin thermally enhanced PWP device.

Each integrated 1 Ω path can switch a separate load, reducing the need for four discrete driver and protection circuits when a controller has several low-current outputs.

An external current-limit resistor and thermal shutdown contain overload faults, while the internal clamp handles the negative voltage generated when an inductive load is turned off.

The A variant returns open-drain status rather than the analog current-sense signal of version B, which suits systems that need fault interrupts without continuous load-current measurement.

Open-load and short-to-battery detection remain available for wire diagnosis across the automotive grade 1 ambient range.

质量 · 运输 · 付款

详情

质量确认

发货前核对批次、封装、标签及丝印。可按需提供验货照片,并协助第三方检验。

运输

支持全球交付。承运商、交期及买方指定货代要求,在报价时确认。

付款

付款方式、币种及贸易条款,以正式报价或形式发票为准。