全部型号

LM61495QRPHRQ1

制造商型号：
LM61495QRPHRQ1
制造商：
Texas Instruments
产品类型：
Buck Converter
系列：
LM61495-Q1
封装：
16-VQFN-HR
描述：
Automotive 10-A synchronous buck converter with selectable low-EMI switching controls.

产品属性

属性数值
Input Voltage3 to 36 V
Output CurrentUp to 10 A
Switching Frequency200 kHz to 2.2 MHz adjustable
EMI ControlPin-selectable spread spectrum and switch-node slew rate
Light-Load ModeConstant-frequency or PFM selectable
Reset OutputFiltered, delayed release
Operating Junction Temperature-40 to 150 °C
Automotive QualificationAEC-Q100 Grade 1
Package Details16-VQFN-HR (RPH), 4.5 × 3.5 mm, wettable flanks

产品详细说明

LM61495QRPHRQ1 is a 10-A automotive synchronous buck converter supplied in a 16-pin, wettable-flank RPH VQFN-HR package for high-current point-of-load rails.

Its 3-to-36-V input range accommodates vehicle-derived supply variation, while the integrated switches remove the need to size a separate high-side and low-side MOSFET pair.

A programmable 200-kHz-to-2.2-MHz frequency range lets the designer balance magnetic size, switching loss and placement relative to sensitive radio bands.

Pin-selectable spread spectrum and adjustable switch-node rise time help control emissions at the source rather than relying entirely on later filtering and shielding.

The selectable constant-frequency or pulse-frequency-modulation light-load mode and filtered reset output provide system-level choices for idle efficiency and downstream power sequencing.

质量 · 运输 · 付款

详情

质量确认

发货前核对批次、封装、标签及丝印。可按需提供验货照片，并协助第三方检验。

运输

支持全球交付。承运商、交期及买方指定货代要求，在报价时确认。

付款

付款方式、币种及贸易条款，以正式报价或形式发票为准。

查看全部