全部型号

TPS54618CQRTERQ1

制造商型号：
TPS54618CQRTERQ1
制造商：
Texas Instruments
产品类型：
Buck Converter
系列：
TPS54618C-Q1
封装：
16-WQFN

产品属性

属性数值
TopologySynchronous buck; 2 integrated MOSFETs
Input Voltage2.95-6 V
Output Current6 A
Output VoltageAdjustable using an external divider; output cannot be below the 0.799 V internal reference; practical minimum and maximum depend on VIN, load and switching on/off limits
Switching Frequency300 kHz to 2 MHz
ProtectionUndervoltage lockout, overcurrent frequency foldback and thermal shutdown
Operating Temperature-40 to +125 °C (ambient)
Control ModeCurrent-mode control
Reference Voltage0.8 V; +/-1% over -40 to +150 °C
MOSFET On-resistance12 mΩ typical for each integrated MOSFET
Clock SynchronizationExternal clock synchronization supported
StartupAdjustable slow start and sequencing
Power-Good OutputOpen drain; output within 93-107% of nominal voltage
QualificationAEC-Q100 Grade 1
Package Details16-pin WQFN (RTE), 3.00 x 3.00 mm nominal body, thermally enhanced

产品详细说明

TPS54618CQRTERQ1 is a Texas Instruments TPS54618C-Q1 analog device.

Step-down converters regulate a higher input voltage to a lower output with high efficiency, using an inductor-based switching stage.

This ordering code is specified at 16.

Engineers apply it in point-of-load supplies and industrial control.

Its advantage is the regulation and protection around the load, which removes external components.

On the bench, the parameters that decide the design are Input Voltage 2.95-6 V and Output Current 6 A.

Its Switching Frequency is stated as 300 kHz to 2 MHz in the data sheet.

质量 · 运输 · 付款

详情

质量确认

发货前核对批次、封装、标签及丝印。可按需提供验货照片，并协助第三方检验。

运输

支持全球交付。承运商、交期及买方指定货代要求，在报价时确认。

付款

付款方式、币种及贸易条款，以正式报价或形式发票为准。