TRS3232EQPWRQ1

Mfr. #:
TRS3232EQPWRQ1
Mfr.:
Texas Instruments
Product Type:
Automotive RS-232 Transceiver
Series:
TRS3232E-Q1
Package / Case:
16-TSSOP
Description:
Automotive dual RS-232 transceiver, 250 kbit/s, 3–5.5 V, 16-TSSOP

Product Attributes

AttributeValue
Channels2 drivers and 2 receivers
Data RateUp to 250 kbit/s
Supply Voltage3 V to 5.5 V
Supply Current300 µA typical
Operating Temperature−40 °C to +125 °C
InterfaceTIA/EIA-232-F and ITU V.28
Charge-Pump CapacitorsFour external 0.1 µF capacitors
RS-232 Pin ESD±15 kV HBM; ±8 kV IEC 61000-4-2 contact; ±15 kV IEC air-gap
Driver Slew Rate30 V/µs maximum
QualificationAutomotive qualified
Package Details5.0 mm × 4.4 mm body, 0.65 mm pitch

Product Details

TRS3232EQPWRQ1 translates two UART-level transmit and receive channels to the bipolar signaling required by an RS-232 connector. Its internal dual charge pump derives the line voltages from a single 3 V to 5.5 V supply, but four external 0.1 µF capacitors remain part of the conversion path and must be placed with short return loops.

The automotive-qualified device supports signaling through 250 kbit/s with a 30 V/µs maximum driver slew rate. The RS-232 pins carry specified ±15 kV HBM, ±8 kV IEC contact and ±15 kV IEC air-gap protection; these device ratings help at the connector but do not replace system-level transient, grounding and cable tests.

Quality · Shipping · Payment

Details

Quality Confirmation

Pre-shipment checks cover batch, package, labels and markings. Inspection photos and third-party inspection support are available on request.

Shipping

Worldwide delivery is supported. Carrier, lead time and buyer-appointed forwarder requirements are confirmed with the quotation.

Payment

Payment method, currency and trade terms are subject to the formal quotation or proforma invoice.