MAX3232IPWR

Mfr. #:
MAX3232IPWR
Mfr.:
Texas Instruments
Product Type:
RS-232 Transceiver
Series:
MAX3232
Package / Case:
16-TSSOP
Description:
Dual RS-232 transceiver, 250 kbit/s, 3–5.5 V, 16-TSSOP

Product Attributes

AttributeValue
Channels2 drivers and 2 receivers
Data RateUp to 250 kbit/s
Supply Voltage3 V to 5.5 V
Supply Current300 µA typical, 1 mA maximum with no load
Operating Temperature−40 °C to +85 °C (I grade)
InterfaceTIA/EIA-232-F and ITU V.28
Charge-Pump CapacitorsFour external capacitors; values depend on supply condition
RS-232 Pin ESDGreater than ±15 kV HBM
Driver Slew Rate30 V/µs maximum
Package Details5.0 mm × 4.4 mm body, 0.65 mm pitch

Product Details

MAX3232IPWR provides two drivers and two receivers between logic-level UART signals and an RS-232 cable. A dual charge pump creates the positive and negative line rails from a 3 V to 5.5 V supply; the four external capacitor values depend on the chosen supply condition, so the datasheet application table and close placement are part of a valid implementation.

The I-grade PW order operates from −40 °C to +85 °C and supports up to 250 kbit/s with a 30 V/µs maximum driver slew rate. Its serial-port pins are rated above ±15 kV HBM, but this base MAX3232 specification must not be confused with the separate MAX3232E device's IEC contact and air-gap ratings.

Quality · Shipping · Payment

Details

Quality Confirmation

Pre-shipment checks cover batch, package, labels and markings. Inspection photos and third-party inspection support are available on request.

Shipping

Worldwide delivery is supported. Carrier, lead time and buyer-appointed forwarder requirements are confirmed with the quotation.

Payment

Payment method, currency and trade terms are subject to the formal quotation or proforma invoice.