DS90UB947TRGCRQ1

Mfr. #:
DS90UB947TRGCRQ1
Mfr.:
Texas Instruments
Product Type:
OpenLDI to FPD-Link III Serializer
Series:
DS90UB947-Q1
Package / Case:
VQFN-64
Description:
OpenLDI to FPD-Link III Serializer

Product Attributes

AttributeValue
Supply VoltageVDD11 1.045 to 1.155 V; VDD18/VDDIO 1.71 to 1.89 V; I2C rail 1.71 to 1.89 V or 3.135 to 3.465 V
Operating Temperature-40 to +105 °C ambient; continuous PLL lock during temperature transitions has additional start/end-temperature limits in Section 6.3
Direction / LinkSingle/dual OpenLDI receiver to single/dual FPD-Link III output
Link RateUp to 3.36 Gbps single serial pair or 2.975 Gbps per pair for dual-pair operation; line rate includes framing
Video Interface18-bit or 24-bit RGB via OpenLDI; single or dual LVDS input; up to 170-MHz pixel clock
Control InterfaceI2C up to 1 MHz; SPI pass-through and GPIO back channel
Reference ClockTiming recovered from OpenLDI input; recommended clock 25 to 170 MHz single-link input, 50 to 170 MHz dual-link input; FPD-Link output single-link pixel clock limited to 96 MHz
Power Consumption459 mW typical, 684 mW maximum normal operation with checkerboard pattern under datasheet DC test conditions
Package DetailsVQFN, RGC, 64 terminals; 9 x 9 mm body; 0.5 mm pitch; 1.0 mm maximum height

Product Description

DS90UB947TRGCRQ1 takes an OpenLDI video stream and serializes it for a remote FPD-Link III receiver. Selecting single or dual serial output changes available video throughput; the 170-MHz input pixel-clock capability requires dual-link output above 96 MHz.

Video, audio and bidirectional control share the link. Its continuous-PLL-lock temperature-transition restrictions should be considered in systems that must keep video locked through a large temperature excursion.

Quality · Shipping · Payment

Quality Confirmation

Pre-shipment checks cover batch, package, labels and markings. Inspection photos and third-party inspection support are available on request.

Shipping

Worldwide delivery is supported. Carrier, lead time and buyer-appointed forwarder requirements are confirmed with the quotation.

Payment

Payment method, currency and trade terms are subject to the formal quotation or proforma invoice.