MAX96714GTJ/VY+T

Mfr. #:
MAX96714GTJ/VY+T
Mfr.:
Analog Devices
Product Type:
GMSL™ Deserializer
Series:
MAX96714
Package / Case:
32-TQFN
Description:
Single-input GMSL2/GMSL1-to-MIPI CSI-2 deserializer, 3 or 6 Gbps GMSL2 forward link, 32-TQFN

Product Attributes

AttributeValue
Supply VoltageVTERM 1.14–1.26 V; VDD18 1.7–1.9 V; VDD 0.95–1.05 V or 1.14–1.26 V; VDDIO 1.7–3.6 V
Operating Temperature−40 to +105 °C ambient
Deserializer Input1 GMSL2/GMSL1 link over 50 Ω coaxial or 100 Ω shielded twisted-pair cable
GMSL2 Forward Link Rate3 or 6 Gbps (MAX96714 variant)
GMSL1 Forward Link Rate3.12 Gbps
Reverse Link Rate187.5 Mbps in GMSL2 mode; 1 Mbps in GMSL1 mode
Video Output4-lane MIPI CSI-2 v1.3 / D-PHY v1.2, up to 2.5 Gbps per lane
Virtual ChannelsUp to 16
Control InterfacePrimary I²C/UART up to 1 MHz, two pass-through I²C/UART ports, nine configurable GPIOs
Functional SafetyASIL-B compliant in GMSL2 mode (MAX96714 variant)
Link DiagnosticsAdaptive equalization, eye-opening monitor and error-status output
Package Details32-pin side-wettable TQFN with exposed pad (T3255Y), 5 × 5 mm

Product Details

MAX96714GTJ/VY+T receives one GMSL2 or GMSL1 camera link over coaxial or shielded twisted-pair cable and delivers video to a host SoC through a four-lane MIPI CSI-2 output. This MAX96714 variant supports 3 or 6 Gbps forward GMSL2 operation, while each CSI-2 D-PHY output lane is rated up to 2.5 Gbps. Camera pixel traffic, link overhead and the configured output lane rate must fit the selected transport mode; otherwise the video buffer can overflow.

The simultaneous reverse channel lets the host configure the remote camera through I²C or UART while video travels forward. Pixel mode repackages video lines for the GMSL link, whereas tunnel mode reconstructs the CSI-2 byte stream and checks its original CRC at the deserializer output. Selecting a mode affects which data types and integrity checks the host can use.

The MAX96714 option supports the 6 Gbps rate and UART functions that distinguish it from the 3 Gbps, I²C-only MAX96714R. Analog Devices specifies ASIL-B compliance for MAX96714 in GMSL2 mode; that classification does not extend unchanged to GMSL1 mode. GTJ denotes the 32-pin TQFN package, /VY identifies automotive qualification and wettable flanks, and +T specifies tape-and-reel supply.

Quality · Shipping · Payment

Details

Quality Confirmation

Pre-shipment checks cover batch, package, labels and markings. Inspection photos and third-party inspection support are available on request.

Shipping

Worldwide delivery is supported. Carrier, lead time and buyer-appointed forwarder requirements are confirmed with the quotation.

Payment

Payment method, currency and trade terms are subject to the formal quotation or proforma invoice.