Board control · Interface bridging · Embedded vision

Lattice Low-Power FPGAs

Lattice FPGAs add programmable logic around processors, sensors and board interfaces. MachXO devices handle system control and I/O expansion, Certus families support general-purpose logic, and CrossLink targets vision interfaces. iCE40 and ECP5 address different power, logic and connectivity requirements; the family name alone does not identify a compatible device.

Submit an RFQView part numbers

Products and applications

Lattice products and circuit roles

Core products

PRODUCT FUNCTIONS

MachXO system-control FPGAs

MachXO2 provides nonvolatile programmable logic for reset control, signal sequencing and I/O expansion. Its early-start behavior makes it useful beside a processor that is still booting. Check the exact family, I/O voltage, package and configuration requirements when maintaining an existing board.
Explore MachXO2

PRODUCTS AND APPLICATIONS

Certus general-purpose FPGAs

Certus-NX combines programmable logic with I/O and interfaces for compact embedded designs. CertusPro-NX extends the range for designs needing different logic and connectivity resources. Select the device around actual pin, interface and memory requirements rather than logic capacity alone.
Explore Certus-NX

PRODUCTS AND APPLICATIONS

CrossLink vision-interface FPGAs

CrossLink-NX connects image sensors and processing devices through MIPI and programmable interfaces. Its logic, memory and DSP resources also support processing along the video path. Sensor format, lane rate and the receiving processor interface determine the bridge architecture.
Explore CrossLink-NX

PRODUCTS AND APPLICATIONS

iCE40 compact, low-power logic

iCE40 UltraPlus supplies programmable logic, memory and DSP resources for small, power-sensitive equipment. It can implement interface adaptation and local processing beside a host controller. Review the power budget, I/O count and package before choosing a density.
Explore iCE40 UltraPlus

PRODUCTS AND APPLICATIONS

ECP5 connectivity and DSP

ECP5 and ECP5-5G combine programmable logic and DSP resources for connectivity and data processing beside ASICs or application processors. Transceiver availability and capability depend on the selected variant. An ECP5 family label is not a substitute for the complete device code.
Explore ECP5 and ECP5-5G

Typical applications

PRODUCTS AND APPLICATIONS

Industrial camera data paths

A camera may need to bridge a sensor output, combine streams or prepare data before it reaches the host. Lattice machine-vision resources show how programmable logic fits into this path. Begin with the sensor interface and host bandwidth, then size the logic and buffers.
View machine-vision designs

PRODUCTS AND APPLICATIONS

Embedded RISC-V systems

Lattice Propel combines RISC-V soft-core processors with peripheral IP to build a processor system inside programmable logic. The embedded ecosystem includes GPIO, timers and serial interfaces. Size the processor, memory and peripherals together with the remaining FPGA logic and firmware workload.
View embedded solutions

Lattice part numbers

View all part numbers
Part numberBrandProduct typePackageQuantityDate codeRFQ
LCMXO3LF-2100C-5BG256CLattice SemiconductorFPGAConfirm by RFQ580026+Request quote
LFE5U-12F-6BG256ILattice SemiconductorFPGAcaBGA-256 (BG256), 14 × 14 mm, 0.8 mm pitch10,00026+Request quote
LCMXO2-2000HC-4MG132CLattice SemiconductorFPGAConfirm by RFQ540026+Request quote
LCMXO640C-3TN144CLattice SemiconductorFPGAConfirm by RFQ560025+Request quote
LCMXO3LF-9400C-5BG484CLattice SemiconductorFPGA484-ball caBGA (BG484), 19 × 19 mm, 0.8 mm pitch90025+/26+Request quote
LCMXO2-7000HC-4FTG256ILattice SemiconductorFPGA256-ball halogen-free ftBGA—Confirm by RFQRequest quote
LCMXO2-640HC-4SG48CLattice SemiconductorFPGAConfirm by RFQ520025+Request quote

Related technical articles

Related manufacturers

Submit an RFQ for Lattice

Please provide the complete part number, required quantity and delivery requirements.

Submit an RFQEmail enquiry