A March 2026 teardown by EEFocus identified a Quectel AG571Q-CN 5G module, an Infineon MCU, vehicle-network devices and a TI battery charger on a unit described as a Xiaomi SU7 T-Box. Together, these parts show why a telematics unit is more than a modem: it must connect to the vehicle, manage power states and keep critical communications available. The teardown is an observation of one unit, not Xiaomi's approved bill of materials for every SU7.

Four jobs on one board #

JobReported marking or deviceWhat a buyer should check
Cellular connectionQuectel AG571Q-CNRegion, bands, carrier approvals, firmware and module revision
Local controlInfineon CYT2B97CACQ0A2 markingComplete manufacturer ordering code and approved software configuration
Vehicle linksBroadcom BCM89887A1AFBG marking; TI TCAN1145-Q1 familyExact PHY documentation, CAN transceiver package and network requirements
Backup-energy pathTI BQ25171-Q1; TAS5411-Q1 appears in the audio pathBattery chemistry, charger configuration and system-level emergency-call design

The markings come from the published teardown. Some identify a family or package top mark rather than a confirmed, complete ordering code. A board photograph also cannot establish the connected rail, firmware settings or every option enabled in the vehicle.

The AG571Q-CN suffix matters beyond the board #

The teardown identifies the AG571Q-CN as an automotive 5G NR module for a China-region configuration. It should not be treated as interchangeable with modules intended for other regions on the strength of the family name alone. A new-region design needs its own check of supported bands, carrier approval and emergency-call requirements.

For an existing design, the approved module revision and firmware belong beside the full order code in a purchase request. A board photograph cannot show every option enabled in the vehicle.

The MCU, Ethernet PHY and CAN transceiver have different roles #

The Infineon marking reported by EEFocus is associated with the TRAVEO T2G CYT2B9 MCU family. An MCU of this class can coordinate wake states, watchdogs and vehicle interfaces while the cellular subsystem handles network traffic. The chip marking alone does not reveal Xiaomi's application software or which vehicle messages the unit sends.

The teardown also reports a Broadcom BCM89887A1AFBG Ethernet PHY and a TI TCAN1145-Q1 CAN transceiver. Ethernet and CAN serve different network needs; the report describes selective wake for the CAN device. The exact Broadcom variant's capabilities should be checked against its controlled product documentation rather than inferred from another BCM8988x device.

For purchasing, a family name such as TCAN1145-Q1 is insufficient when a board has already been approved. The package and packing suffix must match the approved orderable part, for example TCAN1145DRQ1 where that is the design's actual choice. The Infineon top marking needs the same check against the full MCU ordering code.

Backup power is a system question #

TI's BQ25171-Q1 is an automotive 800 mA linear charger for specified lithium or NiMH cell arrangements. Its published operating input is 3–18 V, with 40 V load-dump tolerance. The teardown's identification of this charger is a useful sign of a local battery-charging path; it does not, by itself, prove how long the T-Box can operate after vehicle power is lost.

The same teardown identifies a TAS5411-Q1 audio amplifier. These parts are consistent with a design that has backup energy and an emergency-audio path, but the emergency-call behavior depends on the battery, power routing, software and vehicle-level validation. Neither a charger nor an amplifier data sheet establishes that behavior alone.

Turn a teardown into a usable purchase request #

For an approved vehicle program or an installed fleet, start with the design's own BOM and revision. State the complete manufacturer ordering code, package, date code requirements and approved firmware or configuration where applicable. For the AG571Q, include region and module revision; for the MCU, verify that the reported top mark maps to the required orderable code; for the charger, confirm cell chemistry and charging configuration.

Provide the full part number, quantity, destination and acceptable date-code range so the offer can be matched to the design. A teardown is a useful starting point for understanding the architecture, but it cannot replace the customer's AVL or authorize an electrical substitution.

Key references #

Use the manufacturer datasheet and approved engineering documents for final design decisions.