Moving an electric vehicle requires delivering battery energy to its motor. Lights, seats, pumps and numerous other loads require power distributed throughout the vehicle. Power switches participate in both energy conversion and load control.

MOSFETs are widely used for these tasks. A metal-oxide-semiconductor field-effect transistor controls a current path through its gate signal. The controller decides when an action should occur, the gate driver supplies the required drive, and the MOSFET switches the power circuit.

Three major power-conversion applications #

The traction inverter converts high-voltage battery DC into controlled three-phase motor currents. A common two-level, three-phase inverter has six switch positions, using pulse-width modulation to control its output. During regenerative braking, energy generated by the motor returns to the battery through the inverter.

Traction inverters can use SiC MOSFETs, IGBTs or other suitable power devices. SiC MOSFETs belong in a MOSFET count, while IGBTs require their own category. Voltage rating, switching and conduction losses, and cooling requirements shape the choice.

The onboard charger, or OBC, handles AC charging. Grid power passes through rectification, power-factor correction and isolated conversion to produce DC for the battery. Silicon MOSFETs, SiC MOSFETs and other power devices perform switching or rectification according to the topology and power level. For DC fast charging, offboard equipment performs the main AC-to-DC conversion before connecting to the vehicle's high-voltage charging circuit.

The high-voltage-to-low-voltage DC-DC converter supplies the 12 V or other low-voltage electrical system from the traction battery and charges the low-voltage battery. High-voltage-side switches and low-voltage-side synchronous rectifiers serve different conversion roles. Conduction resistance and cooling are particularly important on a high-current low-voltage output.

Typical EV energy paths for AC charging, traction and low-voltage power distribution
Typical energy paths. Low-voltage levels and conversion topologies depend on the vehicle platform.
Typical EV energy paths for AC charging, traction and low-voltage power distribution
Typical energy paths. Low-voltage levels and conversion topologies depend on the vehicle platform.

Body loads make the switch count accumulate #

Windows, mirrors, seats, tailgates, wipers, fans and pumps involve motor or actuator control. Seat heaters, lighting and control modules also need individual supply and protection channels. Adding independently controlled features generally adds loads to manage.

A simple load can use a high-side or low-side switch. Reversing a DC motor commonly uses an H-bridge with four switch positions. Brushless motors use multiphase bridges. A seat with several independently adjustable motors therefore requires several drive circuits.

These switches may be discrete MOSFETs or integrated into smart power ICs. For example, TPS1HB16AQPWPRQ1 is an automotive protected high-side switch that controls low-voltage loads while providing associated protection and diagnostic functions.

PWM and related techniques regulate LED brightness, motor speed and heating power. The MOSFET repeatedly switches, with the control pattern governing average current or output power. Zonal power distribution brings switching, sensing and fault management closer to the loads.

Battery protection spans main and auxiliary circuits #

The battery management system measures cell voltages, temperatures and battery current, then coordinates state assessment, balancing and fault responses. High-voltage traction-battery main circuits commonly use contactors, fuses and associated devices for connection, isolation and fault protection. Designs may also incorporate precharge circuits and additional disconnect devices.

MOSFETs can participate in balancing, precharge, auxiliary supplies and some solid-state disconnect implementations. In balancing circuits, switches control charge transfer or discharge branches. In auxiliary supplies, they support regulation and load management. Their voltage ratings, currents and operating modes depend on the particular circuit.

Low-voltage electronic fuses and protected body switches operate under different conditions from high-voltage solid-state protection. Identifying the actual circuit clarifies which current the MOSFET controls and how the system interrupts an abnormal condition.

What a count of 400 actually includes #

A 2021 TrendForce industry analysis estimated around 200 MOSFETs in a new-energy vehicle, with some higher-end vehicles reaching approximately 400. Actual counts vary with vehicle features, drive topology, power-device selection and integration.

The counting unit also matters. An inverter's six switch positions can be implemented through several power modules, with multiple dies connected in parallel within a position. Smart high-side switches and motor-driver ICs can integrate several power transistors in one package.

Vehicle comparisons therefore need a consistent basis, such as packages, switch positions or dies. A traction inverter's use of IGBTs or SiC MOSFETs also changes its contribution to the MOSFET total.

Both high-voltage conversion and expanding low-voltage load control contribute to device demand. Each switch still has specific requirements for voltage, current, gate drive, losses, junction temperature and protection response. Following the energy paths connects those devices to the vehicle's motion, lighting, heating and actuator operation.