全部型号

TXB0104QRUTRQ1

制造商型号：
TXB0104QRUTRQ1
制造商：
Texas Instruments
产品类型：
Bidirectional Voltage-Level Translator
系列：
TXB0104-Q1
封装：
UQFN-12
描述：
Bidirectional Voltage-Level Translator

产品属性

属性数值
Channels4 non-inverting bidirectional channels, automatic direction sensing
Data Rate90 Mbps at VCCA = 3.3 V +/-0.3 V and VCCB = 3.3 V +/-0.3 V or 5 V +/-0.5 V
Supply VoltageVCCA 1.2 to 3.6 V; VCCB 1.65 to 5.5 V; VCCA <= VCCB
Operating Temperature-40 to +125 °C ambient; AEC-Q100 Grade 1
EnableOE referenced to VCCA; OE low places both ports in high impedance
Power-Off BehaviorVCC isolation and Ioff partial-power-down support
Interface ConstraintsPush-pull signal translation; not intended for open-drain I2C buses; external pull-up/down restrictions apply
Package DetailsUQFN, RUT, 12 terminals; 2 x 1.7 mm body; 0.4 mm pitch; 0.55 mm maximum height

产品描述

The TXB0104QRUTRQ1 is a four-bit translator with independent A and B supply rails and automatic bidirectional sensing. The A rail must not exceed the B rail, and the output-enable input is referenced to VCCA; either lost supply places the outputs in high impedance.

The RUT order uses a compact 12-terminal 2.0 × 1.7 mm UQFN. At VCCA 3.3 V and VCCB 3.3 V or 5 V, TI specifies a 90 Mbps timing limit for RUT; the passively sensed architecture is for push-pull interfaces, not open-drain I²C.

质量 · 运输 · 付款

质量确认

发货前核对批次、封装、标签及丝印。可按需提供验货照片，并协助第三方检验。

运输

支持全球交付。承运商、交期及买方指定货代要求，在报价时确认。

付款

付款方式、币种及贸易条款，以正式报价或形式发票为准。

查看全部