TMP1075DGKR

制造商型号:
TMP1075DGKR
制造商:
Texas Instruments
产品类型:
Digital Temperature Sensor
系列:
TMP1075
封装:
8-VSSOP
描述:
12-bit I2C temperature sensor, ±1 °C maximum from −40 to +110 °C, 8-VSSOP

产品属性

属性数值
Sensor TypeDigital local temperature
Operating Temperature−55 °C to +125 °C
Temperature Accuracy±1 °C maximum from −40 °C to +110 °C; ±2 °C maximum from −55 °C to +125 °C
Resolution12 bits, 0.0625 °C per LSB
Supply Voltage1.7 V to 5.5 V
InterfaceI2C and SMBus compatible
I2C AddressesUp to 32 selectable addresses
Conversion Time5.5 ms active conversion
Conversion IntervalSelectable 27.5 ms, 55 ms, 110 ms or 220 ms
Average Supply Current2.7 µA typical at 220 ms conversion interval
Shutdown Current0.37 µA typical at 25 °C with serial bus inactive
Alert FunctionProgrammable high and low thresholds; comparator or interrupt mode
Package DetailsDGK package, 8 pins

产品详细说明

TMP1075DGKR converts local package temperature into a 12-bit digital result with 0.0625 °C resolution and reports it over an I2C- and SMBus-compatible bus. Its maximum error is ±1 °C from −40 °C to +110 °C and ±2 °C over the full −55 °C to +125 °C range, while the thermal path from the monitored object to the VSSOP package determines response lag in the assembled system.

Four selectable conversion intervals trade update rate against average current: the 5.5 ms active conversion is followed by standby, with a 220 ms interval drawing 2.7 µA typically. Shutdown and one-shot operation can reduce measurement activity further. Programmable high and low limits drive the ALERT output in comparator or interrupt mode, so fault persistence and clearing behavior should be chosen with the host software.

The three address pins allow up to 32 TMP1075 devices on one bus and the DGK order uses the eight-pin LM75-compatible pin arrangement. Compatibility still depends on the board supply, pullups and address wiring; the 1.7–5.5 V supply range and the selected I2C timing must be valid for every device sharing the bus.

质量 · 运输 · 付款

详情

质量确认

发货前核对批次、封装、标签及丝印。可按需提供验货照片,并协助第三方检验。

运输

支持全球交付。承运商、交期及买方指定货代要求,在报价时确认。

付款

付款方式、币种及贸易条款,以正式报价或形式发票为准。