全部型号

ISO1042BQDWVRQ1

制造商型号：
ISO1042BQDWVRQ1
制造商：
Texas Instruments
产品类型：
Isolated CAN FD Transceiver
系列：
ISO1042-Q1
封装：
8-SOIC
描述：
Automotive basic-isolation CAN FD transceiver with ±70-V bus fault protection.

产品属性

属性数值
Isolation GradeBasic
Isolation Withstand5000 V RMS for 1 minute, UL 1577
Surge Isolation6000 V peak, basic variant
CAN FD Data RateUp to 5 Mbps
Bus Fault Protection±70 V DC
Receiver Common-Mode Range±30 V
Logic-Side Supply1.71 to 5.5 V
Bus-Side Supply4.5 to 5.5 V
Operating Ambient Temperature-40 to 125 °C
Package Details8-SOIC (DWV)

产品详细说明

ISO1042BQDWVRQ1 is the basic-isolation, automotive ISO1042-Q1 CAN FD transceiver in an eight-pin DWV SOIC package, with the B code distinguishing it from the reinforced option.

Its silicon-dioxide isolation barrier separates the local controller ground from the bus-side ground while CAN FD communication reaches 5 Mbps, a useful boundary for battery and inverter control networks.

The ±70-V DC bus-fault tolerance and ±30-V receiver common-mode range allow the interface to withstand wiring faults and ground shifts that can occur in a vehicle harness.

The logic side accepts 1.71 to 5.5 V while the bus side needs 4.5 to 5.5 V, so both isolated supplies must be planned explicitly.

TI specifies 5000 V RMS withstand for one minute but only a 6000-V-peak surge level for this basic B variant; procurement must not substitute the reinforced rating.

质量 · 运输 · 付款

详情

质量确认

发货前核对批次、封装、标签及丝印。可按需提供验货照片，并协助第三方检验。

运输

支持全球交付。承运商、交期及买方指定货代要求，在报价时确认。

付款

付款方式、币种及贸易条款，以正式报价或形式发票为准。

查看全部